Post Reply 
Question for Trig Gurus
07-30-2022, 09:38 AM (This post was last modified: 07-30-2022 10:05 AM by Thomas Klemm.)
Post: #25
RE: Question for Trig Gurus
(07-29-2022 10:19 PM)ttw Wrote:  There are also some logarithmic forms and a nice continued fraction for arctan(x).

From Inverse trigonometric functions:Logarithmic_forms:

\(
\begin{align}
\arctan(z)=-{\frac {i}{2}}\ln \left({\frac {i-z}{i+z}}\right)
\end{align}
\)

These formulas can't be used as the calculator lacks complex numbers.

From Inverse trigonometric functions:Continued fractions for arctangent:

\(
\begin{align}
\arctan(z)={\frac {z}{1+{\cfrac {(1z)^{2}}{3+{\cfrac {(2z)^{2}}{5+{\cfrac {(3z)^{2}}{7+{\cfrac {(4z)^{2}}{9+\ddots }}}}}}}}}}
\end{align}
\)

To get five correct figures we have to use 4 terms (i.e. the formula above without the \(\cdots\)).

Example

For x = 0.6 we get:

16 × 0.36 ÷ 9
+ 7 ÷ 9 ÷ 0.36 = 1/x
+ 5 ÷ 4 ÷ 0.36 = 1/x
+ 3 ÷ 0.36 = 1/x
+ 1 ÷ 0.6 = 1/x

0.5404217 (0.5404195)

And if we want the result in degrees we add:

× 180 ÷ \(\pi\) =

30.963884 (30.963757)

It can get a bit more tedious to enter \(x^2\) four times if \(x\) is an arbitrary number.

Example

Let's assume we want to calculate \(\cos^{-1}(x)\) for \(x=0.7\).
As before we can use:

\(
\begin{align}
\tan \frac{x}{2} &= \sqrt{\frac{1-\cos x}{1+\cos x}} \\
\end{align}
\)


0.3 ÷ 1.7 =
0.1764706

16 × 0.1764706 ÷ 9
+ 7 ÷ 9 ÷ 0.1764706 = 1/x
+ 5 ÷ 4 ÷ 0.1764706 = 1/x
+ 3 ÷ 0.1764706 = 1/x
+ 1 ÷ 0.1764706 √ = 1/x
× 2 =

0.7953990 (0.7953988)

And again if we want the result in degrees we add:

× 180 ÷ \(\pi\) =

45.573005 (45.572996)


As I don't have this calculator the results were just rounded to 7 places.
Therefore the numbers may vary slightly.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Question for Trig Gurus - Namir - 12-01-2014, 07:49 PM
RE: Question for Trig Gurus - toml_12953 - 12-01-2014, 08:08 PM
RE: Question for Trig Gurus - PANAMATIK - 12-01-2014, 08:46 PM
RE: Question for Trig Gurus - Namir - 12-01-2014, 10:54 PM
RE: Question for Trig Gurus - toml_12953 - 12-02-2014, 02:30 AM
RE: Question for Trig Gurus - Namir - 12-02-2014, 09:21 AM
RE: Question for Trig Gurus - Namir - 12-02-2014, 04:57 PM
RE: Question for Trig Gurus - Albert Chan - 07-29-2022, 03:19 PM
RE: Question for Trig Gurus - Mark Hardman - 12-01-2014, 11:00 PM
RE: Question for Trig Gurus - Thomas Klemm - 12-02-2014, 12:09 AM
RE: Question for Trig Gurus - Namir - 12-02-2014, 12:16 AM
RE: Question for Trig Gurus - Thomas Klemm - 12-02-2014, 01:12 AM
RE: Question for Trig Gurus - Namir - 12-02-2014, 01:50 AM
RE: Question for Trig Gurus - Namir - 12-02-2014, 01:49 AM
RE: Question for Trig Gurus - Namir - 12-05-2014, 02:48 AM
RE: Question for Trig Gurus - Namir - 12-09-2014, 02:19 PM
RE: Question for Trig Gurus - Thomas Klemm - 07-29-2022, 12:59 PM
RE: Question for Trig Gurus - ttw - 07-29-2022, 10:19 PM
RE: Question for Trig Gurus - Thomas Klemm - 07-30-2022, 08:26 AM
RE: Question for Trig Gurus - Albert Chan - 07-30-2022, 06:27 PM
RE: Question for Trig Gurus - Thomas Klemm - 07-30-2022 09:38 AM
RE: Question for Trig Gurus - Thomas Klemm - 07-31-2022, 11:08 AM
RE: Question for Trig Gurus - Albert Chan - 07-31-2022, 09:54 PM
RE: Question for Trig Gurus - Thomas Klemm - 08-01-2022, 05:19 AM
RE: Question for Trig Gurus - Albert Chan - 08-01-2022, 02:36 PM
RE: Question for Trig Gurus - Thomas Klemm - 08-02-2022, 06:35 AM
RE: Question for Trig Gurus - Albert Chan - 08-02-2022, 05:28 PM
RE: Question for Trig Gurus - Thomas Klemm - 08-03-2022, 04:42 PM



User(s) browsing this thread: 1 Guest(s)