[WP 34S] I finally bricked it :-(

[BarryMead]

(02-01-2015 04:42 PM)John Galt Wrote:  It took some effort, but the sacrificial machine I had been using for testing is not only merely dead, it's really most sincerely dead.

I don't personally have such equipment or even know someone who does, but it has been reported in other postings within this forum that SOME have recovered from such a flashing error by loading the firmware into the calculator's flash using the "JTAG" connector. For this to work someone needs an ARM compatible JTAG programming device. The JTAG device is able to write to the flash without assistance from the processor running code in the "BOOT PARTITION" which is how the normal flashing operation works. You might ask around to see if anyone can "UNBRICK" your calculator with a JTAG programmer.

Best of luck, Barry