Serial Port Downloads to 41CL
|
02-26-2015, 01:13 AM
Post: #17
|
|||
|
|||
RE: Serial Port Downloads to 41CL
(02-25-2015 08:47 PM)rwiker Wrote:(02-25-2015 02:07 PM)rprosperi Wrote: This is simple enough and a good idea; I found the section at the back of the CL manual late last night on the serial cable and had the same thought, though for a manufactured cable one wouldn't expect this type of problem. While I hope it's not this, I hope it is this, if you know what I mean. The cable I'm using came from Monte, so it's the correct configuration. I just tested it with a multi-meter and it's OK, no shorts and Tip, Mid and Ring all connect to the appropriate DB9 pins. I'm pretty convinced I must have damaged the wiring on the internal serial connector during assembly, but I'm plowing through all the other possibilities, testing, etc. because I'm learning a lot in the process. Once it's history, it will seem like it was fun, but right now, not so much Thanks for your suggestions and comments. --Bob Prosperi |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)