Serial Port Downloads to 41CL
|
02-26-2015, 01:14 AM
Post: #18
|
|||
|
|||
RE: Serial Port Downloads to 41CL
Hi Bob,
I encountered a similar problem with the serial interface of one of my CLs; the cause was simple: From the CL manual: 14. Carefully plug the connector on the cable into the connector jack on the 41CL circuit board with the “CP” label next to it. This is the programming connector for the CPLD. The connector used is very fragile and was not really designed for multiple insertions, so take your time, but make sure the plug is fully seated in the connector on the 41CL circuit board. In my case the plug was not fully seated, although this wasn't obvious at all. I suggest you check that. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)