Help with reading an old 5.25" DOS-formatted Disk

Threaded Mode | Linear Mode

Help with reading an old 5.25" DOS-formatted Disk

06-01-2015, 12:46 AM (This post was last modified: 06-01-2015 12:48 AM by Mark Hardman.)

Post: #3

Mark Hardman Offline

Senior Member

Posts: 525
Joined: Dec 2013

RE: Help with reading an old 5.25" DOS-formatted Disk

It looks like this would be an easy DIY project.

Here's a USB to 5.25" floppy controller for $55.25USD:

FC5025 USB 5.25" Floppy Controller

5.25" floppy drives are readily available on eBay for $20-$40. You'd also need a power supply for the floppy drive.

Oh, and you could always house your DIY USB 5.25 floppy drive in a nice cigar box. ;-)

Ceci n'est pas une signature.

« Next Oldest | Next Newest »

Messages In This Thread

Help with reading an old 5.25" DOS-formatted Disk - Namir - 05-31-2015, 10:54 PM

RE: Help with reading an old 5.25" DOS-formatted Disk - Bill (Smithville NJ) - 05-31-2015, 11:31 PM

RE: Help with reading an old 5.25" DOS-formatted Disk - Mark Hardman - 06-01-2015 12:46 AM

RE: Help with reading an old 5.25" DOS-formatted Disk - BobVA - 06-01-2015, 08:58 PM

RE: Help with reading an old 5.25" DOS-formatted Disk - Dave Frederickson - 06-01-2015, 12:59 AM

RE: Help with reading an old 5.25" DOS-formatted Disk - Dave Shaffer - 06-01-2015, 02:46 AM

RE: Help with reading an old 5.25" DOS-formatted Disk - Marcus von Cube - 06-01-2015, 08:09 PM

RE: Help with reading an old 5.25" DOS-formatted Disk - John R. Graham - 06-01-2015, 10:12 PM

RE: Help with reading an old 5.25" DOS-formatted Disk - Namir - 06-02-2015, 08:49 AM

RE: Help with reading an old 5.25" DOS-formatted Disk - MattiMark - 06-02-2015, 10:15 AM

User(s) browsing this thread: 1 Guest(s)