Post Reply 
HAngle in FW 7820
06-15-2015, 07:56 AM
Post: #5
RE: HAngle in FW 7820
(06-15-2015 07:51 AM)DrD Wrote:  There are some conflicting descriptions in the User Guide for HAngle settings. Some places state HAngle:=0 sets degree mode, and other places have it as setting radian mode.

The help description has it right:

:=0 for Radians (default)
:=1 for Degrees

(Programmatically or via the command line, when in HOME view.)

in fact...
However HAngle:=0 in CAS gives error, :=1 no, but doesn't change (also in Home), here...
Maybe a setting wrong by me?

Salvo

∫aL√0mic (IT9CLU) :: HP Prime 50g 41CX 71b 42s 39s 35s 12C 15C - DM42, DM41X - WP34s Prime Soft. Lib
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
HAngle in FW 7820 - salvomic - 06-14-2015, 10:39 PM
RE: HAngle in FW 7820 - kharpster - 06-15-2015, 02:16 AM
RE: HAngle in FW 7820 - salvomic - 06-15-2015, 07:37 AM
RE: HAngle in FW 7820 - DrD - 06-15-2015, 07:51 AM
RE: HAngle in FW 7820 - salvomic - 06-15-2015 07:56 AM
RE: HAngle in FW 7820 - DrD - 06-15-2015, 08:03 AM
RE: HAngle in FW 7820 - salvomic - 06-15-2015, 08:05 AM
RE: HAngle in FW 7820 - DrD - 06-15-2015, 08:13 AM
RE: HAngle in FW 7820 - salvomic - 06-15-2015, 08:16 AM
RE: HAngle in FW 7820 - DrD - 06-15-2015, 08:16 AM
RE: HAngle in FW 7820 - DrD - 06-15-2015, 08:21 AM
RE: HAngle in FW 7820 - DrD - 06-15-2015, 08:23 AM
RE: HAngle in FW 7820 - salvomic - 06-15-2015, 08:28 AM
RE: HAngle in FW 7820 - Joe Horn - 06-15-2015, 11:22 AM
RE: HAngle in FW 7820 - salvomic - 06-15-2015, 11:28 AM
RE: HAngle in FW 7820 - compsystems - 06-15-2015, 12:39 PM
RE: HAngle in FW 7820 - Joe Horn - 06-15-2015, 03:11 PM
RE: HAngle in FW 7820 - Digitaldreams - 06-16-2015, 08:48 AM
RE: HAngle in FW 7820 - Joe Horn - 06-16-2015, 02:03 PM
RE: HAngle in FW 7820 - DrD - 06-16-2015, 03:07 PM
RE: HAngle in FW 7820 - DrD - 06-16-2015, 03:22 PM



User(s) browsing this thread: 1 Guest(s)