Post Reply 
Can't connect via USB
07-01-2015, 08:02 PM
Post: #8
RE: Can't connect via USB
(07-01-2015 02:19 PM)Dands Wrote:  I've tried with USB 2.0 in my Mac VM using Windows 8 and also tried on a PC with Windows 7.

How can I install the update if the calculator does not connect to my computer?

Thanks

If you go to the ftp site I suggested, you should find that there are two executable files, one for the connectivity kit, and one for the virtual calculator. There is also a zip file containing the latest firmware for the hardware calculator.

You can install the updated connectivity kit, because it is an executable pc file. The new software may help you get past the USB issue, in win7. From the new Conn Kit, your Prime should then show up via the USB connection. Good luck!

-Dale-
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Can't connect via USB - Dands - 07-01-2015, 05:35 AM
RE: Can't connect via USB - Thomas_Sch - 07-01-2015, 08:45 AM
RE: Can't connect via USB - DrD - 07-01-2015, 10:00 AM
RE: Can't connect via USB - Dands - 07-01-2015, 02:19 PM
RE: Can't connect via USB - DrD - 07-01-2015 08:02 PM
RE: Can't connect via USB - Dands - 07-01-2015, 08:09 PM
RE: Can't connect via USB - Tim Wessman - 07-01-2015, 02:51 PM
RE: Can't connect via USB - Dands - 07-01-2015, 03:01 PM
RE: Can't connect via USB - Dands - 07-01-2015, 07:18 PM
RE: Can't connect via USB - jebem - 07-01-2015, 08:13 PM
RE: Can't connect via USB - Dands - 07-01-2015, 08:28 PM
RE: Can't connect via USB - Tim Wessman - 07-01-2015, 08:35 PM
RE: Can't connect via USB - Dands - 07-01-2015, 08:43 PM
RE: Can't connect via USB - Dands - 07-02-2015, 04:34 AM



User(s) browsing this thread: