HP Forums / Not HP Calculators / Not quite HP Calculators - but related v / [SUCCESS] 34s project closed

Post Reply 
[SUCCESS] 34s project closed
02-16-2014, 04:31 AM (This post was last modified: 02-16-2014 09:50 AM by Jonathan Cameron.)
Post: #18
Jonathan Cameron Offline
Member
 		Posts: 205
Joined: Dec 2013
RE: [CLOSED/FAILED] 34s project initiated
I was having problems getting my FTDI solution working to flash my wp-34s. Eventually I ran across this post:

http://www.hpmuseum.org/cgi-sys/cgiwrap/...977#200119

Which has a bit different procedure to reset the calculator to receive a download (involving holding down the [ON] key during the erasing step). It worked for me!

By the way, i was only able to get this working on windows with MySamba (running as administrator). I could not get the QtFlash working on Windows or Linux.

And I had to cross connect the USB-TTL Tx to the Calculators Rx0 and vice versa (USB-TTL Rx to calculator Tx0).

-Jonathan
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[SUCCESS] 34s project closed - Tugdual - 02-06-2014, 09:44 PM
RE: 34s project initiated - Tugdual - 02-08-2014, 03:22 PM
RE: 34s project initiated - walter b - 02-08-2014, 05:42 PM
RE: 34s project initiated - Tugdual - 02-11-2014, 12:16 PM
RE: 34s project initiated - Bit - 02-11-2014, 03:43 PM
RE: 34s project initiated - Tugdual - 02-11-2014, 04:41 PM
RE: 34s project initiated - Tugdual - 02-14-2014, 11:31 PM
RE: 34s project initiated - walter b - 02-15-2014, 07:59 AM
RE: 34s project initiated - Tugdual - 02-15-2014, 08:42 AM
RE: [CLOSED/FAILED] 34s project initiated - Jonathan Cameron - 02-16-2014 04:31 AM
RE: [SUCCESS] 34s project closed - Tugdual - 03-08-2014, 01:20 PM



User(s) browsing this thread: 1 Guest(s)

Contact Us | The Museum of HP Calculators | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication