Hoppi 1.3.2 Release

[Han]

(01-11-2017 07:55 AM)JDW Wrote:  Settings within I/O:

FMT: ASC
XLAT: Newlyweds
CHL: 3
BAUD: 9600
PARITY: None

Cable is connected nicely to the Mac's USB at one end and the HP48 at the other.

Any thoughts on what the problem could be? (Batteries are still good -- no low battery warning at all.)

Thanks,

James W.

Format should probably be BIN (binary) and not ASC. I'm not sure what is meant by "newlyweds" for XLAT (translation). My guess, though, is that translation should be set to 1. Did you also make sure to MERGE the RAM with a RAM CARD in SLOT1? This is required, as the built-in RAM is not enough to download Metakernel into the calculator.

EDIT: Also, what ROM version do you have. Some ROM versions have issues with file transfers if certain flags are not set/cleared properly. Consult the HP48 FAQ for more info on bugs.