[HP48GX] Testing repaired keyboard
|
07-25-2016, 05:17 PM
(This post was last modified: 07-25-2016 07:21 PM by fnas.)
Post: #9
|
|||
|
|||
RE: [HP48GX] Testing repaired keyboard
(07-25-2016 02:32 PM)mfleming Wrote: You should need only a single connection to a pad to supply ground to the CPU board. may be I don't understand well: if I connect one, and only one, pad to the case ground to supply ground to the CPU board, the other 3 pad connection are unnecessary? If I'm not mistaken I see that the A, B, C and D pads are independents and each is connected to the ground only through its twist tab. So each components connected to the A, B, C, and D pads, have its ground connection. Therefore I'm thinking to connect the 4 pieces of pipe together and then one to ground on the case. In other words: the PCB needs 4 independent connections to the ground, isn't it? Tanks, fnas |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[HP48GX] Testing repaired keyboard - fnas - 07-21-2016, 09:29 AM
RE: [HP48GX] Testing repaired keyboard - mfleming - 07-21-2016, 11:29 PM
RE: [HP48GX] Testing repaired keyboard - TomC - 07-24-2016, 11:59 AM
RE: [HP48GX] Testing repaired keyboard - TomC - 07-24-2016, 01:52 PM
RE: [HP48GX] Testing repaired keyboard - fnas - 07-24-2016, 05:00 PM
RE: [HP48GX] Testing repaired keyboard - mfleming - 07-25-2016, 01:58 AM
RE: [HP48GX] Testing repaired keyboard - fnas - 07-25-2016, 12:32 PM
RE: [HP48GX] Testing repaired keyboard - mfleming - 07-25-2016, 02:32 PM
RE: [HP48GX] Testing repaired keyboard - fnas - 07-25-2016 05:17 PM
RE: [HP48GX] Testing repaired keyboard - mfleming - 07-26-2016, 02:42 PM
RE: [HP48GX] Testing repaired keyboard - fnas - 08-01-2016, 12:00 PM
RE: [HP48GX] Testing repaired keyboard - mfleming - 08-01-2016, 03:49 PM
|
User(s) browsing this thread: 1 Guest(s)