pyILPER Version 1.3.4 released

[jch]

Hi Dave,

(12-19-2016 12:28 AM)Dave Frederickson Wrote:  So you've some controller, like a 41 or 71 connected to the PIL-Box and you've established a connection to pyILPER on a virtual COM port.

Absolutely, this worked right out of the box !

(12-19-2016 12:28 AM)Dave Frederickson Wrote:  Now you've reconfigured pyILPER to communicate via TCP/IP, but your controller is still on a virtual COM port.

Of course, I did the test with a TCP/IP loop controller and everything's running fine with Ilper, but PyIlper stays deaf, though it is listening on the right port and frames are knocking at the port.

(12-19-2016 12:28 AM)Dave Frederickson Wrote:  If you use Emu71/Win you can establish a TCP/IP connection with pyILPER.

I'm doing my tests with Free42 HPIL eXtensions and I will give a try to Emu71/Win and look at the frames exchanged !

[Edit] Seems ok with Emu71 on the same host (aka localhost) but not on a different host. I'll take some time to do more tests tomorrow and try to catch some IP frames.

Thanks for the trick.

Cheers. Jean-Christophe