Free42x - HP-IL extensions to Free42
|
11-04-2016, 06:26 PM
Post: #7
|
|||
|
|||
RE: Free42x - HP-IL extensions to Free42
(11-04-2016 03:19 PM)Vincent Weber Wrote: I have tested this on my local wifi network between my Android phone and Virtual Hp-il / ilPer on my PC. I put it in TCP/IP mode, closed the loop by putting each other's ip adress in the config, and I also reversed the ports numbers in/out (60000 and 60001). I can see a frame, then IlPer says the connection failed. Did I miss something ? Ok, so one half of the communication is Ok ! And for the returning path, please double check IP address & outgoing port in Ilper and ingoing port in Free42x. Can you ping the phone's IP ? Any firewall popup on the PC ? You can try to disable it. (11-04-2016 03:19 PM)Vincent Weber Wrote: Can this work over wifi ? I read somewhere that wifi was very bad to transport hp-il protocol, too much latency or something like that. Would it be better with 4G? I run it over Wifi at home and didn't met any latency issues (some in Bluetooth, hence the loop latency combo). I didn't try in 4G, need port forwarding and stable IPs on both sides... Cheers. Jean-Christophe. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)