Classic battery door latch 3d model?

[Nate Martin]

(06-24-2017 04:37 PM)Dave Frederickson Wrote:  

(06-24-2017 03:46 PM)Nate Martin Wrote:  like this? https://www.shapeways.com/product/KXBVLX...d=63044258

I left a little more material on the shelf to keep it a little more rigid. If you think I need to take out more material just ask.

Close. The model looks great, except the detent bumps on the stock port cover are located at the top back corners of the cover and snap in place when the bumps clear the port opening. Insert a port cover in Port 1, take out the HP-IL module, and observe how the detent works by looking through the HP-IL module opening. You can get dimensions from measuring a cover or the H/W IDS.

Dave

PM sent, initial version of the model is back from shapeways