Threaded Mode | Linear Mode

Nick · (This post was last modified: 02-04-2017 09:06 AM by Nick.)

(02-04-2017 04:53 AM)revwillie Wrote: I just did this earlier this week. I flashed the main bin file on monday and last night I was able to send the TVM solver from the windows emulator to the 30b/34s.

I spent less than $3USD on a USB to RS232 interface cable as described here:
http://www.thereminworld.com/Forums/T/29...b-to-wp34s

i found several on ebay

those instructions worked in older windows environments. in windows 10, you have to downgrade the drivers for the interface (since the cheap cables are knock-offs) and to run MySamba as admin.

I'll second that -- that's the procedure I use. I run a trial of Windows 7 in VirtualBox (both free online) for the drivers to work. Note -- the calculator is very particular about the order... make sure you hold all wires in place from start to finish. If the process fails, start from the beginning. It takes me several tries and patience. A second set of hands would help. It's well worth the effort.