Post Reply 
WP34 resets when using Y^X
02-28-2014, 09:44 PM
Post: #5
RE: WP34 resets when using Y^X
(02-28-2014 06:07 PM)Jonathan Cameron Wrote:  What is the minimum "safe" voltage of the WP-34s?

From the manual I see that batteries with voltage less thatn 2.8 V should be replaced. But this thread seems to hint 2.8 V may not be enough. I received refurbished HP-30b units from ebay and they all had a voltage of 3.0 V. I'm wondering what the life will be on these units and whether I should consider replacing the batteries immediately (if the nominal new voltage is more like 3.2 V).

Hmmh, what is "safe"? If you call SAVE every once and a while, everything is voltage-break safe on the WP 34S. Also compare p. 44 and the voltages mentioned there.

d:-)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
WP34 resets when using Y^X - Randy - 02-28-2014, 02:03 AM
RE: WP34 resets when using Y^X - Paul Dale - 02-28-2014, 02:11 AM
RE: WP34 resets when using Y^X - Randy - 02-28-2014, 03:22 AM
RE: WP34 resets when using Y^X - walter b - 02-28-2014 09:44 PM
RE: WP34 resets when using Y^X - Randy - 03-01-2014, 12:13 AM
RE: WP34 resets when using Y^X - Paul Dale - 03-01-2014, 12:54 AM



User(s) browsing this thread: 1 Guest(s)