A change of power... battery change info needed

[Dave Frederickson]

Matt,

Embrace the opportunity to learn a new skill. It shouldn't be that difficult to figure out. Your screws are probably some sort of cross-point type. Typical cross-point types include Phillips, Reed and Prince, and Posidriv. Look here for more details. Typically I find that people select a cross-point screwdriver that's too small. This is evident by slop between the screw and the driver. Go up a size until the tip of the screwdriver exhibits no slop. If the screwdriver wants to twist out of the screw head then double-check the screw type or apply a little more pressure.

Dave