HP-71B: How to load and run a BIN file?

[Dave Frederickson]

This would be much easier if the IRAM image were already on a LIF disc image, so I attached one.

Here's an outline of the steps.
1. Create the IRAM. Execute FREEPORT(1), or whichever port your 32k RAM module is plugged into.

2. Copy ROMCOPY from PILIMAGE.DAT. Execute COPY ROMCOPY:TAPE, assuming PILIMAGE.DAT is mounted on the first mass storage device.

3. Mount PIRATE.lif in pyILPER.

4. ROMCOPY the IRAM image on the LIF disc image to the IRAM. Execute ROMCOPY PIRATE:TAPE TO :PORT(1).

You should now be able to RUN PIRATE.