Post Reply 
Introduction and Thankyou
07-20-2017, 01:40 PM
Post: #18
RE: Introduction and Thankyou
Quote:The Swiss micros were something I had a look at, I'd be interested to hear from people who have experience with then firsthand as to how they feel compared to the HP, one of the things I love about the 12c is the hinged, clicky buttons. Also probably pick up one of those Victor models too.

I have the DM41L, the itty bitty one. The keys are a little different, of course, given the size, but very satisfying and very clicky. It is almost too small for long programming sessions, though --- I should have held up a credit card before I ordered it for that. I am not disappointed, the mistake was mine, and I enjoy using it, and it's an excuse to use further disposable income on the larger one! Smile

I suspect the DM12L I got for my brother in law is similar in that regard as far as keys go.

They are very well engineered and well built devices, especially at the quantity I suspect he's running. I've encountered a lot of low-to-middle volume hardware in my career, and most of it does not hold up well. Swiss Micros products do not have those flaws, and I'd recommend them to anyone.
[/quote]
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Introduction and Thankyou - Zac Bruce - 07-18-2017, 11:56 AM
RE: Introduction and Thankyou - rprosperi - 07-18-2017, 02:16 PM
RE: Introduction and Thankyou - BobVA - 07-18-2017, 09:10 PM
RE: Introduction and Thankyou - lemontea - 07-18-2017, 10:13 PM
RE: Introduction and Thankyou - KF6GPE - 07-18-2017, 11:47 PM
RE: Introduction and Thankyou - Zac Bruce - 07-19-2017, 12:20 AM
RE: Introduction and Thankyou - SlideRule - 07-19-2017, 12:04 PM
RE: Introduction and Thankyou - rprosperi - 07-19-2017, 03:09 PM
RE: Introduction and Thankyou - lemontea - 07-19-2017, 11:46 PM
RE: Introduction and Thankyou - Zac Bruce - 07-20-2017, 01:21 AM
RE: Introduction and Thankyou - rprosperi - 07-20-2017, 01:52 AM
RE: Introduction and Thankyou - Gamo - 07-20-2017, 09:30 AM
RE: Introduction and Thankyou - Gamo - 07-20-2017, 09:59 AM
RE: Introduction and Thankyou - Zac Bruce - 07-20-2017, 11:27 AM
RE: Introduction and Thankyou - KF6GPE - 07-20-2017 01:40 PM
RE: Introduction and Thankyou - KF6GPE - 07-21-2017, 06:27 AM
RE: Introduction and Thankyou - bshoring - 07-23-2017, 03:18 AM
RE: Introduction and Thankyou - Zac Bruce - 07-23-2017, 04:15 AM
RE: Introduction and Thankyou - Zac Bruce - 07-27-2017, 05:15 AM
RE: Introduction and Thankyou - Gamo - 07-27-2017, 07:18 AM



User(s) browsing this thread: 1 Guest(s)