Post Reply 
ILPer as MASSMEM for HP71b
10-17-2017, 01:42 AM
Post: #4
RE: ILPer as MASSMEM for HP71b
(10-16-2017 11:09 PM)rprosperi Wrote:  Also, have you formatted the virtual drives prior to use? On the 71B, you would do:

INITIALIZE [VOL-LABEL]:TAPE(1), where VOL-LABEL is an optional volume label for that particular virtual disk.

Before you can initialize a virtual drive you must mount a LIF disc image. One way is to create a zero byte file, rename the extension to .LIF or .DAT, and then mount the image using the Open file diaglog in the Mass Storage area of the ILPer window. A LIF disc image can also be created and initialized using HPDir.

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ILPer as MASSMEM for HP71b - dingebre - 10-16-2017, 06:21 PM
RE: ILPer as MASSMEM for HP71b - rprosperi - 10-16-2017, 11:09 PM
RE: ILPer as MASSMEM for HP71b - Dave Frederickson - 10-17-2017 01:42 AM
RE: ILPer as MASSMEM for HP71b - dingebre - 10-16-2017, 11:33 PM
RE: ILPer as MASSMEM for HP71b - dingebre - 10-17-2017, 02:33 AM



User(s) browsing this thread: 1 Guest(s)