Post Reply 
newRPL - build 1255 released! [updated to 1299]
07-15-2018, 05:41 AM
Post: #228
RE: newRPL - build 1001 released! [update:build 1052]
(07-15-2018 03:03 AM)Claudio L. Wrote:  Most of the flags were eliminated. The ones that still exist can be configured from the menu System/Settings/Flags (pressing keys P,E,A,A in sequence will take you there)
Fonts are no longer controlled by flags. The possible configurations are explained in this post. It's much more flexible than it was, as you can choose from various different fonts, and you can combine different font sizes for different areas of the screen.
The stack line numbers are visible when there's things on the stack. Empty lines don't display the numbers anymore (this was a suggestion to keep the screen clean by another forum member). It can't be controlled from a flag either, only used stack slots display their number.

I get it.

(07-15-2018 03:03 AM)Claudio L. Wrote:  Finally, there's no option to display the clock (yet).

With seconds would be nice ;-)
Also, the TIME function with running seconds (like on a 41) would be nice. ;-)

(07-15-2018 03:03 AM)Claudio L. Wrote:  I'm not familiar with Parallels, you should investigate if it has a USB pass-through option somewhere.
I found good news at this link. Not sure if it applies to your particular version, but should be easy for you.
As long as you can let a VM see the physical USB device, newRPL Desktop will see your calc and transfer data.

I’m quite familiar with it. Yes, the VM can see all USB devices.

(07-15-2018 03:03 AM)Claudio L. Wrote:  If you try compiling yourself for Mac, please take notes and share here, I'd like to write instructions in the wiki for other Mac users in the same situation.
Will definitely do if and when I succeed. But where can I get the .tgz files ready to compile?
Maybe I missed something, but I can’t find them.

Engineer & Senior IT Executive
2x HP41CL, HP41CX, HP48GX, HP50g, 2x82162A Printer, 2x82143A Printer, 2x HP-IL, 2x Card-Readers, PIL-BOX.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: newRPL - build 1001 released! - pier4r - 12-16-2017, 08:03 AM
newRPL - on Hp 39gs - Martin Hepperle - 06-05-2019, 06:51 AM
RE: newRPL - build 1001 released! - pier4r - 12-23-2017, 10:16 AM
RE: newRPL - build 1001 released! - pier4r - 01-01-2018, 09:42 AM
t - Claudio L. - 01-01-2018, 03:06 PM
RE: newRPL - build 1001 released! - pier4r - 01-01-2018, 03:41 PM
RE: newRPL - build 1001 released! - pier4r - 01-02-2018, 04:54 PM
RE: newRPL - build 1001 released! - pier4r - 01-02-2018, 06:58 PM
RE: newRPL - build 1001 released! [update:build 1052] - Neve - 07-15-2018 05:41 AM
newRPL - brickviking - 10-05-2018, 06:01 AM
How to participate? - erazor - 12-13-2019, 07:12 AM



User(s) browsing this thread: