Post Reply 
newRPL - build 1255 released! [updated to 1299]
12-06-2019, 09:25 AM
Post: #620
RE: newRPL - build 1255 released! [updated to 1299]
(11-14-2019 07:36 AM)jpcuzzourt Wrote:  
(11-11-2019 10:27 PM)Claudio L. Wrote:  That's actually an area where we could use some community effort. If somebody can come up with a printable overlay, I'd order a few myself! The keyboards I believe have physically the same geometry, so the same overlay would work for 50g, 40gs, 39gs, etc.
The best image I could find is what I used for newRPL Desktop, so if you have it installed just look in the program folder and copy the jpg from there. But I'm not sure it has enough quality for printing.

Thanks for this. I found newrpl-sources/bitmap/keyboard.png. It's useable when scaled in GIMP to 69x104mm* (261x393pixels), but it's a bit blurry and the shifted values are difficult to make out. I may work on it a little if I find some time.

Edit: I've started working on a clean newRPL keyboard layout graphic for us to use. I'll share when I have it in a useful state.

May be it usefull. I did began this drawing for my 39gs, but later bought "second hand" 49g+. This overlay not tested with print. In QCAD needs to move text symbols.


Attached File(s)
.txt  newrpl_overlay.dxf.txt (Size: 302.41 KB / Downloads: 21)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: newRPL - build 1001 released! - pier4r - 12-16-2017, 08:03 AM
newRPL - on Hp 39gs - Martin Hepperle - 06-05-2019, 06:51 AM
RE: newRPL - build 1001 released! - pier4r - 12-23-2017, 10:16 AM
RE: newRPL - build 1001 released! - pier4r - 01-01-2018, 09:42 AM
t - Claudio L. - 01-01-2018, 03:06 PM
RE: newRPL - build 1001 released! - pier4r - 01-01-2018, 03:41 PM
RE: newRPL - build 1001 released! - pier4r - 01-02-2018, 04:54 PM
RE: newRPL - build 1001 released! - pier4r - 01-02-2018, 06:58 PM
newRPL - brickviking - 10-05-2018, 06:01 AM
RE: newRPL - build 1255 released! [updated to 1299] - _nmr_ - 12-06-2019 09:25 AM
How to participate? - erazor - 12-13-2019, 07:12 AM



User(s) browsing this thread: 3 Guest(s)