Post Reply 
41CL How to install CLUTILS-4H
06-26-2018, 12:45 PM (This post was last modified: 06-27-2018 09:59 AM by Podalirius.)
Post: #21
RE: 41CL How to install CLUTILS-4H
(06-25-2018 06:10 PM)cgh Wrote:  I put in attachment a shell/gawk script, which will be part of the future 41CLutils.
It takes the mem_ref.txt (mem_ref_v5.txt) and copy all the .ROM image into the /41CL/RAW/RAW-xyz.ROM according to the address described in the mem_ref.txt.

- Delete all FLASH files into the nsimII 41CL/RAW directory: cd nsimII; rm -rf 41CL/RAW/RAW-[01]*.ROM
- Unzip the archive from Monte's site somewhere: mkdir 41CL/ROM_180624; cd 41CL/ROM_180624; unzip ...../rom_files_180624.zip
- Unzip the mem_ref.sh.zip into this directory and do: ./mem_ref.sh -rawdir ../RAW/ <mem_ref.txt (You can also use mem_ref_v5.txt instead, but at this time, nsimII does not see images over RAW-1FF.ROM...)

If you have previously installed nsimII with make install, just redo this to install the new images into the your installation directory. Else, it is ready and you should see the good XPMM with YAST and YSTO.

Hi, I Thank you so much!!!!
I greatly appreciated your help!!!!
I don't know the Sy41CL so, in waiting for 41CL become available again,
I use your nsimII emulator to study and make experience.
Your nsimII is very important for me!
Thank you so much again!!!
.....
Today 06-26-2018 I taked your advices with nsimII and all work very nice!!!
Thank you very, very much!!!
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)