Post Reply 
New HP Prime Skins v5 working on FW 13865.
10-26-2018, 07:10 AM (This post was last modified: 12-23-2018 12:36 AM by Spybot.)
Post: #1
New HP Prime Skins v5 working on FW 13865.
Hello!

I just like to share some skins, I just added a Medium Size Skin, I hope you like them.
To use the XLarge Skin, You have to download Parts 1 & 2, then put them together in the directory path described below.

INSTALLATION INSTRUCTIONS:
1.- Close the virtual calculator.

2.- Unzip all the files, (each skin has 4 files).

3.- Copy and paste only the files to the following path:
C:\ ... \Documents\HP Prime\Skins
o en español:
C:\ ...\Documentos\HP Prime\Máscaras

4.- Now you open the virtual calculator and change the skin.

Enjoy!




.zip  Compact.zip (Size: 395.19 KB / Downloads: 35)

.zip  Medium_Vetical.zip (Size: 548.1 KB / Downloads: 12)

.zip  Large Horizontal.zip (Size: 672.72 KB / Downloads: 22)

.zip  XLarge Horizontal Part 1.zip (Size: 727.46 KB / Downloads: 17)

.zip  XLarge Horizontal Part 2.zip (Size: 429.12 KB / Downloads: 14)

Spybot.
Find all posts by this user
Quote this message in a reply
10-26-2018, 01:08 PM
Post: #2
RE: New HP Prime Skins v5 working on FW 13865.
Hola Dante, dentro de Documents no existe el folder HP Prime\Skins aunque, si manualmente tu lo creas y colocas los archivos, hprime virtual los puede leer, pero creo que es por compatibilidad con las versiones anteriores, por defecto los archivos deben estar en

32 bits
C:\Program Files (x86)\HP\HP Prime Virtual Calculator\images\
C:\Program Files (x86)\HP\HP Prime Virtual Calculator\skins\

64 bits
C:\Program Files\HP\HP Prime Virtual Calculator\images\
C:\Program Files\HP\HP Prime Virtual Calculator\skins\

Por lo tanto hay que realizar esta aclaración

Muchas Gracias
Jaime
Find all posts by this user
Quote this message in a reply
10-26-2018, 06:11 PM
Post: #3
RE: New HP Prime Skins v5 working on FW 13865.
Hello Compsystems!

I just installed the HP Prime virtual calculator FW 13865 in windows 10, Once you run it, it automatically creates a folder called HP Prime\Skins within the "Documents" folder.
C:\ ... \Documents\HP Prime\Skins
Then you just drop the skin files in there and that would be it.
I remember Tim Wessman said that this folder was specifically designed for personalized User Skins, that's why I sent them there.
Also I don't have a 32bit PC so I assume it should work there as well.

Spybot.
Find all posts by this user
Quote this message in a reply
10-27-2018, 02:29 AM (This post was last modified: 10-27-2018 02:29 AM by Carlos295pz.)
Post: #4
RE: New HP Prime Skins v5 working on FW 13865.
Enviarla a Documentos evita las direcciones 32 o 64 bits en Archivos de programas que debemos evitar mandar a alguien ahí, anteriormente Tim Wessman mencionó que es preferible usar Documentos antes que la carpeta de instalación en Archivos de programa

Viga C | TD | FB
Visit this user's website Find all posts by this user
Quote this message in a reply
10-27-2018, 04:52 AM
Post: #5
RE: New HP Prime Skins v5 working on FW 13865.
The correct place for skins is in Documents/HP Prime/Skins as stated. The only exception would be if you are installing for many users.

It will find them in the install directory, but that will remove them when you install in the future potentially.

TW

Although I work for HP, the views and opinions I post here are my own.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)