NumWorks firmware version 13/ß14 2020
|
03-28-2020, 06:50 PM
(This post was last modified: 06-03-2020 02:49 AM by compsystems.)
Post: #1
|
|||
|
|||
NumWorks firmware version 13/ß14 2020 | |||
03-28-2020, 07:27 PM
Post: #2
|
|||
|
|||
RE: NumWorks firmware version 13.1 March 2020
(03-28-2020 06:50 PM)compsystems Wrote: More info They finally fixed the Python input command. Yay! Tom L Cui bono? |
|||
03-30-2020, 05:43 PM
Post: #3
|
|||
|
|||
RE: NumWorks firmware version 13.1 March 2020 | |||
03-31-2020, 02:06 AM
Post: #4
|
|||
|
|||
RE: NumWorks firmware version 13.1 March 2020
(03-30-2020 05:43 PM)Don Shepherd Wrote:(03-28-2020 07:27 PM)toml_12953 Wrote: They finally fixed the Python input command. Yay! Here's an example: >>> a=input('x? ') x? 62 >>>print(a) 666put('x? ') Tom L Cui bono? |
|||
03-31-2020, 08:34 AM
Post: #5
|
|||
|
|||
RE: NumWorks firmware version 13.1 March 2020
Number of the Beast
Everything will be alright in the end. If it's not alright, then it's not the end. |
|||
04-01-2020, 04:01 PM
Post: #6
|
|||
|
|||
RE: NumWorks firmware version 13.1 March 2020
13.2
Mathplotlib https://tiplanet.org/forum/viewtopic.php...ba#p252187 |
|||
04-01-2020, 09:21 PM
Post: #7
|
|||
|
|||
RE: NumWorks firmware version 13.1 March 2020
(03-31-2020 02:06 AM)toml_12953 Wrote:Thanks Tom. I just received my Numworks calc today and have been playing with it. Entering:(03-30-2020 05:43 PM)Don Shepherd Wrote: Tom, what was the problem with the input command? a=input('x? ') 62 print(a) directly into the Python shell on the calc was a frustrating experience, trying to do shift lock as required and not finding the single quote on the keyboard at all (I found it under the toolbox key). I can now see the value of writing Python scripts on the computer (Chromebook in my case) and uploading. And I see the output 62 instead of the 666 stuff. Thanks for the info you provided. I'm looking forward to learning both Python and the Numworks calculator. |
|||
04-02-2020, 02:42 AM
Post: #8
|
|||
|
|||
RE: NumWorks firmware version 13.1 March 2020
(04-01-2020 04:01 PM)compsystems Wrote: 13.2 Yes! A great release that also gives more memory for Python. Tom L Cui bono? |
|||
06-03-2020, 02:48 AM
(This post was last modified: 06-03-2020 02:36 PM by compsystems.)
Post: #9
|
|||
|
|||
RE: NumWorks firmware version 13.1 March 2020 | |||
06-03-2020, 06:09 AM
Post: #10
|
|||
|
|||
RE: NumWorks firmware version 13/ß14 2020
Picture too small: can't read a thing.
Greetings, Massimo -+×÷ ↔ left is right and right is wrong |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)