Post Reply 
Auto power-off
12-20-2013, 04:46 AM
Post: #1
Auto power-off
What is the auto power-off rules that exist on the Prime? The reason I ask is because I recently forgot to shut off my computer in my office and had the Prime connected to the USB, Connectivity software was not running, and the next morning noticed that the Prime was still on. I had previously also encountered a low battery situation when I first got the calculator when it was not plugged into USB, making me think I had left it on without realizing it, and assuming it would shut down automatically by itself. Is there a setting for this somewhere? I haven't found it looking so far if it exists.

I don't have conclusive tests to prove it happens EVERY time but am leaning towards thinking that there is no auto power-off time limit.

Jacob
Visit this user's website Find all posts by this user
Quote this message in a reply
12-20-2013, 05:16 AM
Post: #2
RE: Auto power-off
(12-20-2013 04:46 AM)Jacob Wall Wrote:  What is the auto power-off rules that exist on the Prime?

What's supposed to happen is this:
On batteries: dim after 30 seconds idle, auto-off after 5 minutes idle.
USB powered: Never dim, never auto-off.
As noted here before, the initial release version had some bugs in this regard.

<0|ΙΈ|0>
-Joe-
Visit this user's website Find all posts by this user
Quote this message in a reply
12-20-2013, 05:33 AM (This post was last modified: 12-20-2013 05:33 AM by Michael de Estrada.)
Post: #3
RE: Auto power-off
(12-20-2013 05:16 AM)Joe Horn Wrote:  
(12-20-2013 04:46 AM)Jacob Wall Wrote:  What is the auto power-off rules that exist on the Prime?

What's supposed to happen is this:
On batteries: dim after 30 seconds idle, auto-off after 5 minutes idle.
USB powered: Never dim, never auto-off.
As noted here before, the initial release version had some bugs in this regard.

Mine dims and does the auto-off thing if I connect it to a live USB port, but the CK is not running. Go figure. And, yes, I've updated the firmware.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)