Post Reply 
WP 34S Modulo Bug
06-23-2014, 01:45 PM
Post: #41
RE: WP 34S Modulo Bug
So the story goes happily to bed with a bug fix.

Farewell, you were an interesting thread.

Not much use to me personally, can't reflash the operating system.

Still "A nod's as good as a wink to a blind horse".
Find all posts by this user
Quote this message in a reply
06-23-2014, 05:40 PM
Post: #42
RE: WP 34S Modulo Bug
(06-23-2014 01:45 PM)Gerald H Wrote:  So the story goes happily to bed with a bug fix.

Farewell, you were an interesting thread.

Not much use to me personally, can't reflash the operating system.

Still "A nod's as good as a wink to a blind horse".

You need a serial cable that is not available anymore.
Or you may contact Eric asking for the reflashing service.

Jose Mesquita
RadioMuseum.org member

Find all posts by this user
Quote this message in a reply
06-23-2014, 06:13 PM
Post: #43
RE: WP 34S Modulo Bug
(06-23-2014 08:34 AM)Gerald H Wrote:  
(06-23-2014 07:31 AM)walter b Wrote:  I don't see that. If you think there's a need to convince him, feel free to do it yourself.

d:-)

Thanks for the answer.

No, I shan't try to persuade him, I have already given cogent arguments, & to anyone numerate post #1 is sufficient.

If these were your cogent arguments I don't want to hear your sardonic ones...

Cheers
Andreas
Find all posts by this user
Quote this message in a reply
06-23-2014, 06:50 PM
Post: #44
RE: WP 34S Modulo Bug
(06-23-2014 09:19 AM)Paul Dale Wrote:  I already fixed this bug -- circa twelve hours ago now. Walter doesn't touch the code. That's for me and Marcus. As for the numeric code, it is almost exclusively me.
A new build can be found in the SVN repository.

Marcus von Cube
Wehrheim, Germany
http://www.mvcsys.de
http://wp34s.sf.net
http://mvcsys.de/doc/basic-compare.html
Find all posts by this user
Quote this message in a reply
06-23-2014, 07:27 PM
Post: #45
RE: WP 34S Modulo Bug
(06-23-2014 06:50 PM)Marcus von Cube Wrote:  A new build can be found in the SVN repository.
I've updated, rebuilt, flashed and my r3673 shows -4mod2=0.
Thanks!
Find all posts by this user
Quote this message in a reply
06-23-2014, 09:48 PM
Post: #46
RE: WP 34S Modulo Bug
(06-23-2014 01:45 PM)Gerald H Wrote:  Not much use to me personally, can't reflash the operating system.

There is an easy work around for programs:

Code:
LBL'MOD'
MOD
x=? L
RCL- X
RTN

Or you could use RMDR which is correct but gives different results when the argument's signs are different.


- Pauli
Find all posts by this user
Quote this message in a reply
06-23-2014, 10:09 PM (This post was last modified: 06-23-2014 10:59 PM by pito.)
Post: #47
RE: WP 34S Modulo Bug
(06-23-2014 01:45 PM)Gerald H Wrote:  Not much use to me personally, can't reflash the operating system.
Go to a mobile phone accessory shop (or m.phone service center) and ask for the "CA-42" USB data cable (the cheap clone with blue connectors, not the original Nokia one(!)). It costs almost nothing.
Cut the mobile phone side connector off, there are only 3 wires inside:
Code:
Blue - GND
Green - Rx
White - Tx
That is all HW you need for flashing, you may need a piece of wire for the erase. I do it by holding the 3 serial wires in my fingers while flashing.. No special connector is required. It is not a rocket science..
Disclaimer: do it at your own risk, no warranties of any kind Smile
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: