LIB4 & AMC_OSX issue
|
03-27-2024, 03:45 PM
Post: #1
|
|||
|
|||
LIB4 & AMC_OSX issue
Hi,
i have installed on a NOV64d the LIB4 in page 1-4 and AMC_OSX in page 1-7. No other modules. The libs are from the 2024 repository, i suppose the newest. Lib4 shows R6.06b But i can't see the Bank2 functions like BFCAT PGCAT... and the Cat1 Extend Catalog. The main functions and extend cats (0,7,8,9A...), XEQ, and ASN functions work as expected. I have a HP41CX Halfnut from 1989, what is going wrong? Ralf /41/48/ |
|||
03-31-2024, 02:30 PM
(This post was last modified: 03-31-2024 07:09 PM by Sylvain Cote.)
Post: #2
|
|||
|
|||
RE: LIB4 & AMC_OSX issue
(03-27-2024 03:45 PM)Hiwi Wrote: i have installed on a NOV64d the LIB4 in page 1-4 and AMC_OSX in page 1-7. No other modules. Hello Ralf, You probably used the old library 4 version of the AMC OSX module instead of the new 4 banks version. Try this configuration:
Edit: I have successfully tried these configurations: Using: ClonixConfig61.exe / PicKit2 / NoV-64d Note: the NoV-64d is two modules in one, it can be: - a NoV-64 module (Flash enabled & FRAM enabled) or - a Clonix-D module (Flash enabled & FRAM disabled) Configuration #1
Quote:Note also that you should avoid plugging it together with another bank-switched module (with a 4k footprint) sharing the same logical external port .The last configuration allow me to use HP-IL (page 6 & 7) when needed and has at least a free 4K space for the HEPAX ROM auto-relocalisation functionality to remap itself to page 14(E) or 15(F). Sylvain Côté |
|||
04-02-2024, 10:40 AM
Post: #3
|
|||
|
|||
RE: LIB4 & AMC_OSX issue
Thank you Sylvain,
you are right, I didn't use the correct version of the AMC_OSX module. Now I tried config #3 and it works perfect. Config #4 may be interesting too, in case i will use HPIL. Ralf /41/48/ |
|||
04-03-2024, 06:59 AM
Post: #4
|
|||
|
|||
RE: LIB4 & AMC_OSX issue
Hello Sylvain,
configuration #4 does not work on my CX. I have Lib4 R60, I can see the Warp Module and the functions with CAT2, but when executing e.g. XEQ+, and trying using the autocomplete function, the CX powers down and WARP module is gone , i have an "DC2 BANK3 entry". I made another config with the CCD Module CCDU/L B1/B2. This does not work when i try to use bankswitching. Are they not compatible? Configuration #5 Module type: NoV-64(d) Programmer: PicKit2 Join Blocks: checked (enabled) Flash ROM Block 0 0.1 → HEPAX-4H (managed by ClonixConfig) 0.2 → HEPAX-4H (managed by ClonixConfig) 0.3 → HEPAX-4H (managed by ClonixConfig) 0.4 → HEPAX-4H (managed by ClonixConfig) 0.5 → page C bank 1 : CCDOSX.ROM 0.6 → empty Flash ROM Block 1 1.1 → empty 1.2 → page 4 bank 1 : LIBRARY4.ROM (managed by ClonixConfig) 1.3 → page D bank 1 : CCDL1B.ROM 1.4 → page D bank 2 : CCDU2B.ROM 1.5 → empty Ralf /41/48/ |
|||
04-03-2024, 08:11 AM
(This post was last modified: 04-03-2024 08:11 AM by Ángel Martin.)
Post: #5
|
|||
|
|||
RE: LIB4 & AMC_OSX issue
Just stumbled into this thread so haven't had a chance to delve into the details but... a good troubleshooting tactic is to mimic the configuration on V41 to discard hardware issues. If it works as expected on V41 then the software is *usually* ok.
"To live or die by your own sword one must first learn to wield it aptly." |
|||
04-05-2024, 01:36 PM
Post: #6
|
|||
|
|||
RE: LIB4 & AMC_OSX issue
Hi,
yes this is an option, but i like more the physical HP41. I have it always in my pocket. And i am using a datalogger in the field. I have the V41 / ilper installed, but never digged into the configuration too much. I don't know how to attach the bank switching modules. Standard modules is easy. Hepax, CCD and so on. Has anyone a config file for a more sophisticated setup? (and i need to exctract the mod files from the romfiles ) How can i use a Nov64d Module? Ralf /41/48/ |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: