16C schematic
|
12-24-2014, 06:18 PM
Post: #1
|
|||
|
|||
16C schematic
Can anyone point me to schematics for the 16C (or 10C/11C/12C/15C)? I only need the keyboard connections: cpu row & column connections for each of the keys.
Thanks, Monte |
|||
12-25-2014, 07:48 AM
(This post was last modified: 12-30-2014 09:14 PM by brouhaha.)
Post: #2
|
|||
|
|||
RE: 16C schematic
The key matrix of the Voyager models is wired like this (hardware keycodes shown in key positions):
Code:
I don't have the pin assignments for the QFP version of the Nut CPU, but the equivalent for the original DIP package is:
|
|||
12-25-2014, 03:42 PM
Post: #3
|
|||
|
|||
RE: 16C schematic
Exceptional! Thank you, Eric.
|
|||
12-26-2014, 11:22 PM
Post: #4
|
|||
|
|||
RE: 16C schematic
(12-25-2014 07:48 AM)brouhaha Wrote: The key matrix of the Voyager models is wired like this (hardware keycodes shown in key positions): Eric: I have no need at all for this info, but I still feel compelled to thank you for the elegant and clear way of expressing this info, and for the insight and patience to create this to share with all. Very cool, and a hearty well-done! --bob --Bob Prosperi |
|||
12-30-2014, 07:51 PM
Post: #5
|
|||
|
|||
RE: 16C schematic
Hi Mike,
I guess that the value KC3/KR3 must be the 0xC3 because all other values in the KC3 column have a "C" as first digit. By the way, does the "(Stgt)" part of your login name mean "Stuttgart"? Then you would be in the same area as I am. Best regards Karl |
|||
12-30-2014, 09:15 PM
Post: #6
|
|||
|
|||
RE: 16C schematic | |||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)