Post Reply 
Help identifying an HP leather case.
01-08-2014, 03:45 PM
Post: #1
Help identifying an HP leather case.
Could I ask the forums help in identifying a leather HP pouch I picked up the other day.

I have searched Google, including images and cannot find any reference to it. It's 5.5x10x1 inches with a Velcro fold-over flap. The flap has the HP / HEWLETT PACKARD logo pressed into the leather. It's all black, and has a soft black interior. There is a small white seam label which says Made in Singapore.

Any idea anybody?

David (DavCorn)


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
01-08-2014, 06:06 PM
Post: #2
RE: Help identifying an HP leather case.
With just a cursory look, pioneer, (hp42s) family
Find all posts by this user
Quote this message in a reply
01-08-2014, 06:35 PM
Post: #3
RE: Help identifying an HP leather case.
Is'nt a 11" diagonal a little too long for a 42s?
Quote this message in a reply
01-08-2014, 06:38 PM
Post: #4
RE: Help identifying an HP leather case.
Didn't pay attention to the dimensions, 5.5 inches wide, wow. Yep not a pioneer but in shape and proportion it would appear similar.

Maybe an hp instrument pouch as opposed to a calc.

Geoff
Find all posts by this user
Quote this message in a reply
01-08-2014, 07:25 PM
Post: #5
RE: Help identifying an HP leather case.
I've found a couple of cases at the flea that were made out of the same material, had the same label, and were about that height but wider.
Because of what I found them with; I believer mine were cable pouches for hp laptop or printer gear (cables?). I turned them inside out and with two seams each to narrow them up they became good homes for naked calcs. Yours looks like it has a factory seam.
As Forrest Gump said: "that's all I know about that".
Find all posts by this user
Quote this message in a reply
01-08-2014, 09:50 PM (This post was last modified: 01-08-2014 09:51 PM by Garth Wilson.)
Post: #6
RE: Help identifying an HP leather case.
It's just a hair too small to be for an HP-75, but close enough that I had to measure. Did HP make any handheld oscilloscopes that size? How thick is it?

http://WilsonMinesCo.com (Lots of HP-41 links at the bottom of the links page, http://wilsonminesco.com/links.html )
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)