Incorrect Simplify

10022015, 08:23 PM
Post: #1




Incorrect Simplify
Can somebody check this for me. I don't have the latest software on my work calculator.
Integrate sqrt(1/x1) from 1/2 to 1 with the minimum or none simplification set in CAS settings. It returns correctly 1/4*pi  sqrt(1/4). However, upon simplifying (or copy and pasting) it will convert the sqrt(1/4) to sqrt(1)/4, obviously quite wrong!! Setting the simplifying to maximum gives (pi2)/4 which is correct. However the incorrect simplifying is troubling. Does this also occur with the latest firmware? Thanks, CHUCK 

10022015, 08:39 PM
(This post was last modified: 10042015 06:07 PM by Tim Wessman.)
Post: #2




RE: Incorrect Simplify
It does. The issue is with the parsing of the copied text into the 2d mode. Specifically, the sqrt(1/4) turns into sqrt(1)/4.
To be clear, pressing the "simplify" button works fine. It is exclusively the copy/paste part that has an issue. What appears to be happening is the sqrt > √ replacement is incorrectly identifying that parenthesis are not required. Definitely now on the list for correction. Many thanks! TW Although I work for HP, the views and opinions I post here are my own. 

« Next Oldest  Next Newest »

User(s) browsing this thread: 1 Guest(s)