Post Reply 
FRAM71 Configuration Example (Intermediate Level) [2017-01-24]
11-03-2015, 01:23 PM (This post was last modified: 01-15-2021 05:42 AM by Sylvain Cote.)
Post: #1
FRAM71 Configuration Example (Intermediate Level) [2017-01-24]
Warning
With the release of the FRAM71B this article is out-of-date and need to be revisited.
I am currently doing a 41CL project and will update this article when the other project is completed.
I strongly suggest to read the FRAM71B thread to get the latest information.

Goal
The goal of this procedure, is to give an example of what are the steps involved in order to create a configuration of intermediate complexity.
A good idea would be to follow the FRAM71 Initialization procedure before doing this one.

Background
This configuration will install the following modules:
* HP41 Translator ROM (16KB+32KB)
* Math ROM (32KB)
* JPC ROM (32KB)
* Backup space (32KB)
* ROM space (32KB) [will contains FRAM71 ToolKit for the duration of this procedure]
* Additional main RAM (160KB)

Revisions
2017-01-24 Out of date warning
2015-11-08 Added "Disclaimer" & formatting adjustments.
2015-11-05 Officially released & cosmetic corrections
2015-11-04 Beta version
2015-11-03 Alpha version

Acknowledgments
I would like to thank ...
Hans Brüggemann for making this fantastic module.
Dave Frederickson for having done the very helpful FRAM71 Toolkit (FRAM71TK).
Robert Prosperi and Dave Frederickson for their continuous support.
Geoff Quickfall for his patience in my lateness to finish his FRAM71 module configuration.

Disclaimer
This procedure was done in good faith.
I do not offer any warranty of any kind.
If you follow this procedure as written, it should work.
If not, send me a PM, or better, post a message in the forum and I will help you, within the limit of my knowledge of course.

Hardware & Software
HP-71B HandHeld Computer (Tested on firmware 1BBBB and 2CDCC)
FRAM71 Module (Hardware: v104 / Firmware: 511)
HP-82401A HP-IL Module (1A or 1B)
PIL-Box (1.5 or greater)
ILPeripherals Simulator [ILPer] (1.52 or greater)
FRAM71 ToolKit [FRAM71TK.LIF] (1.1b or greater)
ROM Images #1 [71ROM1V2.LIF] (v2, presently missing, I have to get the authorization before releasing it)
ROM Images #2 [71ROM2V2.LIF] (v2, presently missing, I have to get the authorization before releasing it)
ROM Images #3 [71ROM3V2.LIF] (v2, presently missing, I have to get the authorization before releasing it)

ROM Images #1 Content : HP-71B OS & IL (ROM/DUMP, 700KB Image)
Code:
   NAME    S TYPE   LEN    DATE    TIME DESCRIPTION
---------- - ----- ----- -------- ----- ----------------------------------------
ROMCOPY      LEX    1727 10/18/15 17:13        ROM Image Loader
HPIL1B       ROM   16384 01/03/00 02:03 82401A HP-IL Interface rev. 1B
HPIL1A       ROM   16384 01/03/00 02:06 82401A HP-IL Interface rev. 1A
OS1AAAAD     BASIC   172 01/03/00 03:28 1AAAA  Main ROM Dump Creator 
OS1AAAA      TEXT     0K 01/03/00 03:17 1AAAA  Main ROM Dump File (missing)
OS1AAAAL     BASIC   159 01/03/00 03:31 1AAAA  Main ROM Dump Loader
OS1BBBBD     BASIC   172 01/03/00 03:17 1BBBB  Main ROM Dump Creator
OS1BBBB      TEXT   135K 01/03/00 03:17 1BBBB  Main ROM Dump File
OS1BBBBL     BASIC   159 01/03/00 03:25 1BBBB  Main ROM Dump Loader
OS2CCCCD     BASIC   172 01/03/00 03:29 2CCCC  Main ROM Dump Creator
OS2CCCC      TEXT     0K 01/03/00 03:17 2CCCC  Main ROM Dump File (missing)
OS2CCCCL     BASIC   159 01/03/00 03:31 2CCCC  Main ROM Dump Loader
OS2CDCCD     BASIC   172 01/03/00 03:29 2CDCC  Main ROM Dump Creator
OS2CDCC      TEXT   135K 01/03/00 03:17 2CDCC  Main ROM Dump File (coming soon)
OS2CDCCL     BASIC   159 01/03/00 03:31 2CDCC  Main ROM Dump Loader

ROM Images #2 Content : HP Application (ROM/LEX/DUMP, 700KB Image)
Code:
   NAME    S TYPE   LEN    DATE    TIME DESCRIPTION
---------- - ----- ----- -------- ----- ----------------------------------------
ROMCOPY      LEX    1727 10/18/15 17:13        ROM Image Loader
AMPISTAT     ROM   32768 01/02/00 22:44 82489A AMPI Statistics Pac
CURVEFIT     ROM   32768 01/02/00 22:56 82484A Curve Fitting Pac
DATACOMM     ROM   16384 01/02/00 23:01 82488A Data Comms Pac
DEMO71       ROM   16384 10/18/15 20:17        Demo Module
DIAG71       TEXT   135K 10/18/15 20:19        Diagnostic Module (Dump File)
DIAG71LD     BASIC   158 10/18/15 20:22        Diagnostic Module (Dump Loader)
CIRCUIT      ROM   16384 10/18/15 20:35 82481A Circuit Analysis Pac
FINANCE      ROM   16384 10/18/15 20:36 82482A Finance Pac
FORTHLDR     BASIC   160 10/18/15 21:09 82441A FORTH Assembler ROM (Dump Loader)
FORTHDMP     TEXT  67840 10/18/15 21:11 82441A FORTH Assembler ROM (Dump HC)
FORTHROM     ROM   16384 10/18/15 21:12 82441A FORTH Assembler ROM
FTH41LDR     BASIC   160 10/18/15 21:15 82490A HP41 Translator Pac (Dump Loader)
FTH41DMP     TEXT  67840 10/18/15 21:16 82490A HP41 Translator Pac (Dump HC)
FTH41ROM     ROM   16384 10/18/15 21:17 82490A HP41 Translator Pac SC
MATHLEX      LEX   27682 10/18/15 21:22 82480A Math Pac (alt.version)
MATHROM      ROM   32768 10/18/15 21:28 82480A Math Pac
SURVEY       ROM   16384 10/18/15 21:30 82483A Surveying Pac
TEXTEDIT     ROM   16384 10/18/15 21:30 82485A Text Editor Pac

ROM Images #3 Content - Third Party (ROM/LEX/DUMP, 700KB Image)
Code:
   NAME    S TYPE   LEN    DATE    TIME DESCRIPTION
---------- - ----- ----- -------- ----- ----------------------------------------
ROMCOPY      LEX    1727 10/18/15 17:13 ROM Image Loader
CMTTOOLS     ROM   32768 10/18/15 21:37 CMT EPROM Tools
DATAMGMT     ROM   32768 10/18/15 21:38 Data Management
JPCE01       ROM   32768 10/18/15 21:39 Journal Paris Chapter ROM Rev. E01
JPCF01       ROM   32768 10/18/15 21:40 Journal Paris Chapter ROM Rev. F01 
JPCF04       LEX   25992 10/18/15 21:41 Journal Paris Chapter ROM Rev. F04
ZENWAND      ROM   16384 10/18/15 21:43 Zengrange Wand

Procedure
Finally, the configuration procedure.

Reset FRAM71
Deactivate FRAM71 modules from memory.

Assumed jumpers configuration
Code:
Description             Jumper settings
----------------------  --------------------------------------------------------
Disable SysRAM          [J1: Open] & [J2: Close]
Disable E0000  Mapping  [CN2-5: Open]
Disable SysRAM Writing  [CN2-4: Open]
Enable  HPBus  Writing  [CN2-3: Open]
Enable  IRAM   Mapping  [CN2-2: Open]
Select  FRAM   Chip     [CN2-1: Open=Bottom_512KB / Close=Top_512KB]

Unmap FRAM71 memory
Code:
POKE "2C000","00000000000000000000000000000000" [ENTER] -> remove FRAM71 memory from the memory map
[OFF] [ON]                                              -> Activate the configuration
MEM [ENTER]                                             -> You should have more than 16000 bytes (16.5KB)

HP-IL Configuration
Setup HP-IL, ILPer and load FRAM71TK virtual tape/floppy.

Connect all the components:
Code:
HPIL: 71B+IL <-> IL Cables <-> PIL-Box 
USB: PIL-Box <-> USB Cable <-> PC/Win <-> ILPer

ILPer: start and configure software
Code:
* Start ILPer.exe software
* Match the "PIL-Box Link" control with the COM port the PIL-Box is using
* Fill the "Mass Storage LIF file" with the LIF image: FRAM71TK.LIF
* Check the Scope check box to activate IL commands tracing
* Press the Start Button

HP71B: activate interface loop
Code:
[ON]               -> You may see some text in ILPer Scope
RESTORE IO [ENTER] -> You should see some text in ILPer Scope

ILPer: deactivate tracing
Code:
* Uncheck the Scope check box to deactivate IL commands tracing, loop integrity has been validated

Initial configuration (HC-T41/SC-T41/MATH/JPC/LEX/IRAM)
The following steps will create the foundation upon we will build the final setup.

Before Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
                              nothing is mapped

Configuration
Code:
POKE "2C000","93A49596979800" [ENTER] -> Starting setup
[OFF] [ON]                            -> Activate the configuration
MEM [ENTER]                           -> You should have around 197KB

After Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_0  2C000  CONF     9                                                       
Chip_0  2C001  F-BLOCK  3     HC E0000 T41 ROM (planned)   1    RAM    32   5.00
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_1  2C002  CONF     A                                                       
Chip_1  2C003  F-BLOCK  4     16KB SC T41 ROM  (planned)   1    RAM    16   5.01
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_2  2C004  CONF     9                                                       
Chip_2  2C005  F-BLOCK  5     32KB Math ROM    (planned)   1    RAM    32   5.02
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_3  2C006  CONF     9                                                       
Chip_3  2C007  F-BLOCK  6     32KB JPC ROM     (planned)   1    RAM    32   5.03
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_4  2C008  CONF     9                                                       
Chip_4  2C009  F-BLOCK  7     32KB Backup      (planned)   1    RAM    32   5.04
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_5  2C00A  CONF     9                                                       
Chip_5  2C00B  F-BLOCK  8     32KB FRAM71TK    (planned)   1    RAM    32   5.05
------  -----  -------------  -------------------------- ----  -----  ----  ----

Install FRAM71 ToolKit
The following steps will install the FRAM71 ToolKit who is essential for installing the HP-41 Translator Module.

Before Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_5  2C00A  CONF     9                                                       
Chip_5  2C00B  F-BLOCK  8     32KB FRAM71TK    (planned)   1    RAM    32   5.05

Configuration
Code:
FREE PORT(5.05) [ENTER]                    -> Create an IRAM for FRAM71 ToolKit
COPY ROMCOPY:TAPE [ENTER]                  -> Load the ROMCOPY LEX
ROMCOPY FRAMTK:TAPE TO :PORT(5.05) [ENTER] -> Load FRAM71 ToolKit into IRAM
VER$ [ENTER]                               -> HP71:1BBBB RCPY:E HPIL:1B RCPY:E
PURGE ROMCOPY [ENTER]                      -> Remove ROMCPY located in main RAM
VER$ [ENTER]                               -> HP71:1BBBB HPIL:1B RCPY:E

After Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_5  2C00A  CONF     9                                                       
Chip_5  2C00B  F-BLOCK  8     32KB FRAM71TK IRAM  (done)   1    RAM    32   5.05

Load HC-TRANS41
Load the hidden part of the HP41 Translator ROM

Before Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_0  2C000  CONF     9                                                       
Chip_0  2C001  F-BLOCK  3     HC E0000 T41 ROM (planned)   1    RAM    32   5.00

Load HC-TRANS41 image file
Code:
RUN MEMBUF [ENTER] -> Port Dev Seq  Size Addr  Type Comment
                   ->   5   0   0    32  30000   0  HC TRANS41 ROM
RUN T2R [ENTER]    -> Copy HC Trans41 32KB image to 30000 
                   -> You will see 3FFC0 when the program has ended

Remap C0000-CFFFF to E0000-EFFFF
Code:
[ON] [ON] [OFF]     -> Shut down the computer
Insert Jumper CN2‐5 -> Activate Chip_0 E0000 mapping
[ON]                -> Wake up the computer

Validate E0000-EFFFF content
Code:
PEEK$("E0000",16) [ENTER] -> "0600EF550EDA21EA" validate HC TRANS41 content
PEEK$("EFBF0",16) [ENTER] -> "03ED03EE03EF03F0" validate HC TRANS41 content

Reconfigure IRAM into ROM
Code:
POKE "2C000","D3A49596979800" [ENTER] -> Reconfigure Chip_0 from RAM "(93)A49596979800" to ROM "(D3)A49596979800"
[OFF] [ON]                            -> Activate the configuration

After Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_0  2C000  CONF     D                                                       
Chip_0  2C001  F-BLOCK  3     HC E0000 T41 ROM    (done)   1    ROM    32   n/a

New configuration after HC-TRANS41 has been mapped & activated
The action to remap Chip_0 from page 3 to page E has the effect to remove itself from the port assignation.
The consequence is that all the others port number has been decreased by .01.
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_0  2C000  CONF     D                                                       
Chip_0  2C001  F-BLOCK  3     HC E0000 T41 ROM    (done)   1    ROM    32   n/a
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_1  2C002  CONF     A                                                       
Chip_1  2C003  F-BLOCK  4     16KB SC T41 ROM  (planned)   1    RAM    16   5.00
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_2  2C004  CONF     9                                                       
Chip_2  2C005  F-BLOCK  5     32KB Math ROM    (planned)   1    RAM    32   5.01
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_3  2C006  CONF     9                                                       
Chip_3  2C007  F-BLOCK  6     32KB JPC ROM     (planned)   1    RAM    32   5.02
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_4  2C008  CONF     9                                                       
Chip_4  2C009  F-BLOCK  7     32KB Backup      (planned)   1    RAM    32   5.03
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_5  2C00A  CONF     9                                                       
Chip_5  2C00B  F-BLOCK  8     32KB FRAM71TK IRAM  (done)   1    RAM    32   5.04
------  -----  -------------  -------------------------- ----  -----  ----  ----

Load SC-TRANS41
Load the visible part of the HP41 Translator ROM

Before Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_1  2C002  CONF     A                                                       
Chip_1  2C003  F-BLOCK  4     16KB SC T41 ROM  (planned)   1    RAM    16   5.00

Load SC-TRANS41 image file
Code:
FREE PORT(5) [ENTER]                     -> Create an IRAM for SC-TRANS41
ROMCOPY TRANS41:TAPE TO :PORT(5) [ENTER] -> copy SC-TRANS41 to new IRAM

Remove IRAM identifier
Code:
RUN MEMBUF [ENTER]                    -> Port Dev Seq  Size Addr  Type Comment
                                      ->   5   0   0    16  78000   1  SC TRANS41 IRAM
                                      -> Warning: for the following commands, use your address if different
PEEK$(“78000”,8) [ENTER]              -> Show “B3DDDDDE” IRAM identifier
POKE ”78000”,”00000000” [ENTER]       -> Remove the IRAM identifier
PEEK$(“78000”,8) [ENTER]              -> “00000000” validates the removal of the IRAM identifier

Reconfigure module type
Code:
POKE "2C000","D3E49596979800" [ENTER] -> Reconfigure RAM "D3(A4)9596979800" to ROM "D3(E4)9596979800"
[OFF] [ON]                            -> Activate the configuration
RUN MEMBUF [ENTER]                    -> Port Dev Seq  Size Addr  Type Comment
                                      ->   5   0   0    16  78000   2  SC TRANS41 ROM

Final validation
Code:
VER$ [ENTER]  -> HP71:1BBBB HPIL:1B FTH41:1A EDT:A RCPY:E
HP41 [ENTER]  -> “HP41 EMULATOR 1A” then SIZE ( max. 10000 ) ?
31 [ENTER]    -> 0 (the emulator has now 31 data registers)
5 3 + [ENTER] -> 8
BYE [ENTER]   -> leave TRANS41 and back to BASIC

After Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_1  2C002  CONF     E                                                       
Chip_1  2C003  F-BLOCK  4     16KB SC T41 ROM     (done)   1    ROM    16   5.00

Loading the LIF file where the MATH image is located
ILPer: fill the "Mass Storage LIF file" with the LIF image: 71ROM2V2.LIF

Load MATH ROM
The following steps will load the Math ROM

Before Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_2  2C004  CONF     9                                                       
Chip_2  2C005  F-BLOCK  5     32KB Math ROM    (planned)   1    RAM    32   5.01

Load MATH image file
Code:
FREE PORT(5.01) [ENTER]                  -> Create an IRAM for MATH ROM
COPY MATHLEX:TAPE TO :PORT(5.01) [ENTER] -> copy MATH ROM to new IRAM

Remove IRAM identifier
Code:
RUN MEMBUF [ENTER]              -> Port Dev Seq  Size Addr  Type Comment
                                ->   5   1   0    32  D0000   1  MATH IRAM
                                -> Warning: for the following commands, use your address if different
PEEK$(“D0000”,8) [ENTER]        -> “B3DDDDDE” IRAM identifier
POKE ”D0000”,”00000000” [ENTER] -> Remove the IRAM identifier
PEEK$(“D0000”,8) [ENTER]        -> “00000000” validates the removal of the IRAM identifier

Reconfigure module type
Code:
POKE "2C000","D3E4D596979800" [ENTER] -> Reconfigure RAM "D3E4(95)96979800" to ROM "D3E4(D5)96979800"
[OFF] [ON]                            -> Activate the configuration
RUN MEMBUF [ENTER]                    -> Port Dev Seq  Size Addr  Type Comment
                                      ->   5   1   0    32  D0000   2  MATH ROM

Final validation
Code:
VER$ [ENTER]           -> HP71:1BBBB HPIL:1B FTH41:1A EDT:A MATH:1A RCPY:E
BVAL("1111",2) [ENTER] -> 15

After Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_2  2C004  CONF     D                                                       
Chip_2  2C005  F-BLOCK  5     32KB Math ROM       (done)   1    ROM    32   5.01

Loading the LIF file where the JPCF04 image is located
ILPer: fill the "Mass Storage LIF file" with the LIF image: 71ROM3V2.LIF

Install JPC ROM
The following steps will load the JPC ROM v.F04

Before Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_3  2C006  CONF     9                                                       
Chip_3  2C007  F-BLOCK  6     32KB JPC ROM     (planned)   1    RAM    32   5.02

Load JPC image file
Code:
FREE PORT(5.02) [ENTER]                 -> Create an IRAM for JPC ROM
COPY JPCF04:TAPE TO :PORT(5.02) [ENTER] -> copy JPC ROM to new IRAM

Remove IRAM identifier
Code:
RUN MEMBUF [ENTER]              -> Port Dev Seq  Size Addr  Type Comment
                                ->   5   2   0    32  C0000   1  JPC IRAM
                                -> Warning: for the following commands, use your address if different
PEEK$(“C0000”,8) [ENTER]        -> “B3DDDDDE” IRAM identifier
POKE ”C0000”,”00000000” [ENTER] -> Remove the IRAM identifier
PEEK$(“C0000”,8) [ENTER]        -> “00000000” validates the removal of the IRAM identifier

Reconfigure module type
Code:
POKE "2C000","D3E4D5D6979800" [ENTER] -> Reconfigure RAM "D3E4D5(96)979800" to ROM "D3E4D5(D6)979800"
[OFF] [ON]                            -> Activate the configuration
RUN MEMBUF [ENTER]                    -> Port Dev Seq  Size Addr  Type Comment
                                      ->   5   2   0    32  C0000   2  JPC ROM

Final validation
Code:
VER$ [ENTER]        -> HP71:1BBBB FTH41:1A EDT:A MATH:1A JPC:F04 HPIL:1B RCPY:E
ATH$("123") [ENTER] -> 132333

After Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_3  2C006  CONF     D                                                       
Chip_3  2C007  F-BLOCK  6     32KB JPC ROM        (done)   1    ROM    32   5.02

Create Backup 32KB IRAM
Allocate a protected memory against Memory Lost for program and data backup

Before Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_4  2C008  CONF     9                                                       
Chip_4  2C009  F-BLOCK  7     32KB Backup      (planned)   1    RAM    32   5.03

Create IRAM
Code:
FREE PORT(5.03) [ENTER] -> Create an IRAM for Backup (Data & Programs)

After Configuration
Code:
Chip_#  Addr.  Configuration  Description                LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_4  2C008  CONF     9                                                       
Chip_4  2C009  F-BLOCK  7     32KB Backup IRAM    (done)   1    RAM    32   5.03

Adding 160KB RAM to main RAM
Code:
POKE "2C000","D3E4D5D69798191A1B1C9D00" [ENTER] -> Adding 160KB : "D3E4D5D69798(191A1B1C9D)00"
RUN MEMBUF [ENTER]                              -> Port Dev Seq  Size Addr  Type Comment
                                                ->   5   5   0   160  40000   0  RAM
MEM [ENTER]                                     -> You should have around 210KB

Cleaning the ROM testing section
Reclaiming the ROM testing space for future ROM

Backup utilities
Code:
COPY ROMCOPY:PORT(5.04) TO :PORT(5.03) [ENTER] -> Needed to load ROM Images
VER$ [ENTER]                                   -> HP71:1BBBB FTH41:1A EDT:A MATH:1A JPC:F04 HPIL:1B RCPY:E RCPY:E

Removing FRAM71TK from memory
Code:
CLAIM PORT(5.04) [ENTER] -> Integrating the IRAM back into main RAM and in so clearing its content
FREE PORT(5.04) [ENTER]  -> Recreating the IRAM space for ROM testing
VER$ [ENTER]             -> HP71:1BBBB FTH41:1A EDT:A MATH:1A JPC:F04 HPIL:1B RCPY:E

Final Configuration
The following table show the final configuration of the FRAM71 for this example.

Code:
Chip_#  Addr.  Configuration  Description      of          LCIM  Type   Size  Port
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_0  2C000  CONF     D                                                       
Chip_0  2C001  F-BLOCK  3     HC E0000 T41 ROM             1    ROM    32   n/a
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_1  2C002  CONF     E                                                       
Chip_1  2C003  F-BLOCK  4     16KB SC T41 ROM              1    ROM    16   5.00
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_2  2C004  CONF     D                                                       
Chip_2  2C005  F-BLOCK  5     32KB Math ROM                1    ROM    32   5.01
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_3  2C006  CONF     D                                                       
Chip_3  2C007  F-BLOCK  6     32KB JPC ROM                 1    ROM    32   5.02
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_4  2C008  CONF     9                                                       
Chip_4  2C009  F-BLOCK  7     32KB Backup IRAM             1    RAM    32   5.03
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_5  2C00A  CONF     9                                                       
Chip_5  2C00B  F-BLOCK  8     32KB ROM Testing IRAM        1    RAM    32   5.04
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_6  2C00C  CONF     1
Chip_6  2C00D  F-BLOCK  9     System RAM 160KB 1 of 5      0    RAM    32   5.05
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_7  2C00E  CONF     1
Chip_7  2C00F  F-BLOCK  A     System RAM 160KB 2 of 5      0    RAM    32   5.05
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_8  2C010  CONF     1
Chip_8  2C011  F-BLOCK  B     System RAM 160KB 3 of 5      0    RAM    32   5.05
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_9  2C012  CONF     1
Chip_9  2C013  F-BLOCK  C     System RAM 160KB 4 of 5      0    RAM    32   5.05
------  -----  -------------  -------------------------- ----  -----  ----  ----
Chip_A  2C014  CONF     9
Chip_A  2C015  F-BLOCK  D     System RAM 160KB 5 of 5      1    RAM    32   5.05
------  -----  -------------  -------------------------- ----  -----  ----  ----

Thats it! ... Have fun! Smile
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)