Does G2 Break this program? - Printable Version +- HP Forums (https://www.hpmuseum.org/forum) +-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html) +--- Forum: HP Prime (/forum-5.html) +--- Thread: Does G2 Break this program? (/thread-14386.html) |
Does G2 Break this program? - toml_12953 - 01-18-2020 04:37 PM Here's a projectile program that works on my HW A and C machines but doesn't work on my HW D (G2) machine. It passes the syntax check on all three. Can anyone tell me why G2 seems to break it? Try running it with velocity 230 and angle 30. On the older machines, the entire trajectory is plotted. On the G2, only one point is plotted. Code: FNA(X,Y,Z) RE: Does G2 Break this program? - Tim Wessman - 01-20-2020 01:35 AM On my mac emulator I just tried it and it worked, then I put it into degrees mode and it printed one item... First thing I normally check when anything trig related is misbehaving. That it? RE: Does G2 Break this program? - toml_12953 - 01-20-2020 02:17 AM (01-20-2020 01:35 AM)Tim Wessman Wrote: On my mac emulator I just tried it and it worked, then I put it into degrees mode and it printed one item... Auuuggggh! You are quite correct. The angle mode was degrees on the G2 machine and radians on the others. Thanks for correcting me so gently! |