+- HP Forums (https://www.hpmuseum.org/forum)
+-- Forum: HP Calculators (and very old HP Computers) (/forum-3.html)
+--- Forum: General Forum (/forum-4.html)
+--- Thread: MAXON Motor (/thread-17769.html)
MAXON Motor - teenix - 11-30-2021 02:19 AM
Hi all,
With some card reader motors failing over time, I thought I would contact MAXON directly to see if there are any replacements available.
Here is the reply...
Code:
Hi Tony, thank you for your enquiry.
Unfortunately there are no longer any details at the factory for this motor. It is a very old motor – I checked maxon catalogues here back as far as 1978 and there were no details then.
A possible replacement is:
(352853) A-max16 Motor, Graphite Brushes, 2W, 3V, Cables.
This motor will produce a nominal speed of 8060rpm and a nominal torque of 1.29mNm.
For 1X (352853) the price = $109.19.
Please see attached data sheet for details.
If you have any queries please let me know.(This is the direct link to the motor shown in the data sheet)
https://www.maxongroup.com/maxon/view/product/motor/dcmotor/amax/amax16/110069
cheers
Tony
RE: MAXON Motor - Dreato - 11-30-2021 06:28 PM
I've actually had 2 of these motors apart, to clean the commutator and wire brushes. It's a big job drilling out pins etc, but it did work and the motors now work again.
If you've got a dead motor, give it a try. Nothing to lose.
Regards,
Dave