Threaded Mode | Linear Mode

Massimo Gnerucci · 09-08-2020, 07:37 PM

(09-08-2020 06:47 PM)twoweims Wrote: I will fix that. I will ship anywhere.

If not a link to your auction, may we know your eBay ID?

Thanks!

Sylvain Cote · (This post was last modified: 09-09-2020 12:51 AM by Sylvain Cote.)

(09-08-2020 10:41 PM)twoweims Wrote: International shipping should be fixed now.
Sorry about that... I am just learning about eBay Selling.

Not quite, it is still not searchable on localized eBay's.
I was able to see your account but not your listed items.
But by manually changing the path I could access it and finally buy it. → https://www.ebay.ca/itm/203100535003
I choose the Faux Granite version, thanks for making them.
Sylvain

Sylvain Cote · (This post was last modified: 09-09-2020 05:04 AM by Sylvain Cote.)

(09-09-2020 02:41 AM)twoweims Wrote: The HP-41 Stands are now on line:

Shipping to: Worldwide
Excludes: Africa, Asia, Central America and Caribbean, Europe, Middle East, North America, Oceania, Southeast Asia, South America
Unable to buy Sad

**rprosperi** · 09-09-2020, 12:09 PM

(09-09-2020 02:41 AM)twoweims Wrote: The HP-41 Stands are now on line:

https://www.ebay.com/itm/203101211285

https://www.ebay.com/itm/203101214994

All sold in about 8 hours! Did I mention demand?? Big Grin

twoweims · 09-10-2020, 12:38 AM

(09-09-2020 05:00 AM)Sylvain Cote Wrote:
(09-09-2020 02:41 AM)twoweims Wrote: The HP-41 Stands are now on line:
Shipping to: Worldwide
Excludes: Africa, Asia, Central America and Caribbean, Europe, Middle East, North America, Oceania, Southeast Asia, South America
Unable to buy

That should no longer be the case! I changed that setting globally in my account.
I will look into it. eBay does not make it easy to set this up...

All of the 41 Stands have sold out. I have four more on the printer now they will be posted within the next couple of days.

Je suis désolé.

twoweims · 09-10-2020, 12:44 AM

(09-09-2020 12:09 PM)rprosperi Wrote:
(09-09-2020 02:41 AM)twoweims Wrote: The HP-41 Stands are now on line:

https://www.ebay.com/itm/203101211285

https://www.ebay.com/itm/203101214994

All sold in about 8 hours! Did I mention demand??

I am truly humbled by the response. I hope these live up to everyone's expectations.
More are on the way...

Sylvain Cote · 09-10-2020, 12:51 AM

(09-10-2020 12:38 AM)twoweims Wrote: That should no longer be the case! I changed that setting globally in my account.
I will look into it. eBay does not make it easy to set this up...

I understand, no problem, thank you for looking into it.

(09-10-2020 12:38 AM)twoweims Wrote: All of the 41 Stands have sold out. I have four more on the printer now they will be posted within the next couple of days.

Great! I will buy one. Thanks! Smile

Sylvain

twoweims · 09-10-2020, 12:55 AM

(09-08-2020 07:37 PM)Massimo Gnerucci Wrote:
(09-08-2020 06:47 PM)twoweims Wrote: I will fix that. I will ship anywhere.

If not a link to your auction, may we know your eBay ID?

Thanks!

my eBay id is

Code:

simpsonde

Geoff Quickfall · 09-10-2020, 03:07 AM

Hi!

Setting up my lab in the next week so I need one HP 41 stand and 1 71B stand!

Let me know when they are available please.

Geoff

David Bengtson · 09-11-2020, 12:23 AM

How well does a 50G fit on this?

**rprosperi** · 09-11-2020, 03:17 AM

(09-11-2020 12:23 AM)David Bengtson Wrote: How well does a 50G fit on this?

Not well at all, unfortunately. The extra length, rounder bottom and relatively tiny rubber 'feet' of the 50g cause it to slide around and not stay still while using it. Also, although the angle of this stand works fine for viewing the display of the intended models (41C, Spice, DM41/42) the LCD on a 50g does not look as clear when viewed this way.

I wonder if tw has a 50g... hmmm...

twoweims · 09-11-2020, 02:41 PM

(09-11-2020 03:17 AM)rprosperi Wrote:
(09-11-2020 12:23 AM)David Bengtson Wrote: How well does a 50G fit on this?

Not well at all, unfortunately. The extra length, rounder bottom and relatively tiny rubber 'feet' of the 50g cause it to slide around and not stay still while using it. Also, although the angle of this stand works fine for viewing the display of the intended models (41C, Spice, DM41/42) the LCD on a 50g does not look as clear when viewed this way.

I wonder if tw has a 50g... hmmm...

Sorry, I do not have a 50g in my collection. I do have a 48G and it definitely does not fit very well. I may re-visit more options in the future.

twoweims · 09-11-2020, 02:50 PM

I have more 41 Stands up on eBay.

Sandstone:
https://www.ebay.com/itm/203103303367

Dark Green:
https://www.ebay.com/itm/203103300348

More 71B Stands are in production. There is still one available:
https://www.ebay.com/itm/203100539112

I seem to have the international exclusion list sorted out.
North America and Europe should no longer be excluded.

Sylvain Cote · 09-11-2020, 03:24 PM

(09-11-2020 02:50 PM)twoweims Wrote: I have more 41 Stands up on eBay. I seem to have the international exclusion list sorted out. North America and Europe should no longer be excluded.

Great! HP-41 sandstone stand successfully ordered. Thank you! Smile

Massimo Gnerucci · 09-11-2020, 07:19 PM

Just ordered a green one.
Thanks a lot!

twoweims · 09-12-2020, 09:29 PM

I have more 71B Stands up on eBay.

Terra Cotta:
https://www.ebay.com/itm/203104264700

Dark Green:
https://www.ebay.com/itm/203104268024

Terra Cotta without the rear shelf for the PIL-Box:
https://www.ebay.com/itm/203104266909

There are still some 41 Stands available:

Dark Green:
https://www.ebay.com/itm/203103300348

Sandstone:
https://www.ebay.com/itm/203103303367

**rprosperi** · 09-12-2020, 10:12 PM

I see the 41 stand has changed a bit, with the 3 holes in the bottom lip (presumably to save material), and the lower lip seems a bit taller. Was this changed to accommodate the 65 & 67 machines with the raised bottom edge?

twoweims · (This post was last modified: 09-12-2020 10:59 PM by twoweims.)

(09-12-2020 10:12 PM)rprosperi Wrote: I see the 41 stand has changed a bit, with the 3 holes in the bottom lip (presumably to save material), and the lower lip seems a bit taller. Was this changed to accommodate the 65 & 67 machines with the raised bottom edge?

The bottom lip is the same height. The holes allow an iPhone to use the stand and not block the speakers. The center hole can accommodate the iPhone charger cable.
It works for my iPhone 11 but I don't want to advertise it as such because it may not work with all sizes and versions of iPhones. I certainly don't want to attempt to play catch-up with Apple's design changes.

Old -vs- New:

Dave Frederickson · 09-13-2020, 06:14 PM

(09-03-2020 03:50 PM)rprosperi Wrote: Hey - where did you get the "Mr Fusion" RAM upgrade for the CR Port? I gotta get me one of those!!

I like the Mr. Fusion CR blank, too. Perhaps a FRAM71 version with an LED hole.

twoweims · 09-13-2020, 08:33 PM

(09-13-2020 06:14 PM)Dave Frederickson Wrote:
(09-03-2020 03:50 PM)rprosperi Wrote: Hey - where did you get the "Mr Fusion" RAM upgrade for the CR Port? I gotta get me one of those!!

I like the Mr. Fusion CR blank, too. Perhaps a FRAM71 version with an LED hole.

If I only had a FRAM71...