Post Reply 
HP Prime G2 RPN use
09-20-2020, 03:42 PM
Post: #1
HP Prime G2 RPN use
I am a G2 newbie and I have had the G2 only about a week so forgive me if this is a stupid question.
It is a very powerful calculator for graphing and solving, but sometimes I pick it up for a quick calculation, like an HP41 and it's different.

Does the G2 have a classic RPN interface?
I don't seem to be able to do something like:
1 ENTER 2 +

It appears like the G2 requires 1 + 2 ENTER, which is not RPN

Thanks,
Victor
Find all posts by this user
Quote this message in a reply
09-20-2020, 05:50 PM
Post: #2
RE: HP Prime G2 RPN use
Press [shift]>[home] to enter settings, then select the drop down menu next to 'Entry:' and select RPN.

I don't use RPN myself, but I've heard many times that RPN on the Prime is not nearly as good as HP's previous calculators.

Cemetech | YouTube
Visit this user's website Find all posts by this user
Quote this message in a reply
09-20-2020, 07:21 PM (This post was last modified: 09-21-2020 05:39 AM by pinkman.)
Post: #3
RE: HP Prime G2 RPN use
I like both entry modes.
For math calculations, I find that Textbook mode is better because of readability and error fixing.
For every day quick calculations, I find RPN is the best.

Well, this means I have to go to the settings every time?

No, because of this program:

Code:

KEY K_Menu()
BEGIN
 local s:={"Textbook","Algebraic","RPN"};
 Entry := ABS(Entry-2);
 TEXTOUT_P(s(Entry+1), 15,9, 1, RGB(255,180,80));
 WAIT(1);
 RETURN −1;
END;

Usage: in User keyboard mode, press Menu.
Or simply: Shift Help Menu.
It toggles from RPN to Textbook, and vice versa.

Regards.

Thibault - not collector but in love with the few HP models I own - Also musician : http://walruspark.co
Find all posts by this user
Quote this message in a reply
09-30-2020, 10:43 AM
Post: #4
RE: HP Prime G2 RPN use
Prime has all the RPN functionality of old HP series calcuators, no problem there.. Its programming does not include RPN commands since it's a totally different architecture.
Find all posts by this user
Quote this message in a reply
05-10-2022, 06:54 PM
Post: #5
RE: HP Prime G2 RPN use
(09-20-2020 07:21 PM)pinkman Wrote:  I like both entry modes.
For math calculations, I find that Textbook mode is better because of readability and error fixing.
For every day quick calculations, I find RPN is the best.

Well, this means I have to go to the settings every time?

No, because of this program:

Code:

KEY K_Menu()
BEGIN
 local s:={"Textbook","Algebraic","RPN"};
 Entry := ABS(Entry-2);
 TEXTOUT_P(s(Entry+1), 15,9, 1, RGB(255,180,80));
 WAIT(1);
 RETURN −1;
END;

Usage: in User keyboard mode, press Menu.
Or simply: Shift Help Menu.
It toggles from RPN to Textbook, and vice versa.

Regards.

This is exactly what I was looking for, thanks!
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)