Post Reply 
NoV-64D and HEPAX Questions
04-08-2024, 01:27 AM
Post: #21
RE: NoV-64D and HEPAX Questions
Diego & Sylvan,

My NoV-64D is currently in Miami on its way here.

In the mean time I am testing with clonixconfig v6.1 and I have the following questions so far:

1. How do I save a configuration to the PC for later modification before downloading to the NoV-64D?
2. In conjunction with #1, how do I load the saved configuration.
3. Even though I unchecked HEPAX when I clicked on proceed, clonixconfig compiled the HEPX1H-0 through 3 files (according to the mpasm log file). Why would it do this if I deselected HEPAX.
4. Does clonixconfig convert the .ROM files to .asm files and then assembles and links them into the ROM Image?
Find all posts by this user
Quote this message in a reply
04-08-2024, 11:51 AM (This post was last modified: 04-08-2024 05:53 PM by Sylvain Cote.)
Post: #22
RE: NoV-64D and HEPAX Questions
(04-08-2024 01:27 AM)BitWiz Wrote:  1. How do I save a configuration to the PC for later modification before downloading to the NoV-64D?
2. In conjunction with #1, how do I load the saved configuration.
Unfortunately, ClonixConfig cannot save and/or restore a module configuration. Sad

(04-08-2024 01:27 AM)BitWiz Wrote:  3. Even though I unchecked HEPAX when I clicked on proceed, clonixconfig compiled the HEPX1H-0 through 3 files (according to the mpasm log file). Why would it do this if I deselected HEPAX.
4. Does clonixconfig convert the .ROM files to .asm files and then assembles and links them into the ROM Image?
I am letting Diego answering that part.

Sylvain Côté
Find all posts by this user
Quote this message in a reply
04-11-2024, 10:01 PM (This post was last modified: 04-11-2024 11:32 PM by BitWiz.)
Post: #23
RE: NoV-64D and HEPAX Questions
Sylvain and everyone else following this thread.

Thank you all for your help. I think I have it nailed down for my initial load.

See the attached file for what I have figured out.

I am still looking for recommendations for good ROMS to use and play with.

Thank you,

Mike


Attached File(s)
.pdf  HP-41_Setup.pdf (Size: 109.7 KB / Downloads: 8)
Find all posts by this user
Quote this message in a reply
04-11-2024, 11:47 PM
Post: #24
RE: NoV-64D and HEPAX Questions
I am not home, I wiil validate your config later.
Do not forget to check for XROM conflict.

Sylvain Côté
Find all posts by this user
Quote this message in a reply
04-12-2024, 12:45 AM
Post: #25
RE: NoV-64D and HEPAX Questions
Thank you. I had forgotten about that.
Find all posts by this user
Quote this message in a reply
04-12-2024, 01:17 AM
Post: #26
RE: NoV-64D and HEPAX Questions
(04-11-2024 11:47 PM)Sylvain Cote Wrote:  I am not home, I wiil validate your config later.
Do not forget to check for XROM conflict.

There are two XROM conflicts in my setup:

1. ZENROM and NOV CHAP ROM
I found the source code for this ROM in an XLS file. As soon as I learn how to compile the M-Code
XLS into a ROM file I can change the XROM number.
2. AMC_OS/X+ and HP-16C ROM. I am unable to find the source for either of these though I might
just not be looking in the right place.

I have attached a copy of the updated configuration file.

Thank you again,

mike


Attached File(s)
.pdf  HP-41_Setup.pdf (Size: 113.08 KB / Downloads: 15)
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)