Post Reply 
41CL - Library 4 and my configuration - instructions for how I did it
08-17-2014, 10:16 PM
Post: #4
RE: 41CL - Library 4 and my configuration - instructions for how I did it
Decided to add one page of Hepax RAM to my configuration in port 4. This requires plugging in the HEPX or HEP2 rom image into one page of port 4 and a RAM 4K block into the other page of port 4.

If you want to plug one page, you do not need to initialize the pointers as described in the 41CL manual To get a 651 block of HEPAX ram added to the configuration I have described above, do this.

ALPHA 0B9>809 ALPHA
XEQ YMCPY

Note: I just plan to use ram page 809. If you want to use another page, change 809 above and below to another ram page.

ALPHA 809-RAM ALPHA
XEQ PLUG4U

ALPHA HEP2 ALPHA
XEQ PLUG4L

XEQ HEPDIR which should show H:DIR EMPTY and then backarrow. Display will show the 651 value indicating 651 free registers of HEPAX ram in the upper page of port 4.

If you want more ram than this, follow the instructions in the 41CL manual.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: 41CL - Library 4 and my configuration - instructions for how I did it - Gene - 08-17-2014 10:16 PM



User(s) browsing this thread: 1 Guest(s)