Search
Member List
Calendar
Help
|
Sharp CE-515P Problem
|
|
08-28-2023, 09:15 PM
Post: #3
|
|||
|
|||
RE: Sharp CE-515P Problem
(08-28-2023 12:04 PM)Jeff_Birt Wrote: Check the DIP switches. Confirm it in in serial mode and that the SW5 is set to TTL serial level (OFF). Also make sure the 7/8bit switch matches the data format you are sending. See page 4. Thanks. I forgot to mention that I'm using the CE-130T RS-232 converter between the PC-500E and the CE-515P so SW5 should be ON for RS-232 levels, I believe. The 7/8 bit switch is set for 8 bits and I use this OPEN: OPEN"1200,N,8,1" AS #1 Tom L Cui bono? |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Sharp CE-515P Problem - toml_12953 - 08-28-2023, 03:08 AM
RE: Sharp CE-515P Problem - Jeff_Birt - 08-28-2023, 12:04 PM
RE: Sharp CE-515P Problem - toml_12953 - 08-28-2023 09:15 PM
RE: Sharp CE-515P Problem - Jeff_Birt - 08-28-2023, 10:02 PM
RE: Sharp CE-515P Problem - toml_12953 - 08-29-2023, 12:33 AM
RE: Sharp CE-515P Problem - Jeff_Birt - 01-19-2024, 04:05 PM
|
User(s) browsing this thread: 4 Guest(s)