(HP71B) HP-IL PILBOX ILPER ILVIDEO setup; HowTo?

[floppy]

Got it.
The 2nd mass storage in the loop had the AID 7 which could be seen in the HP-IL Device info.
See attachment.

Now the device can be reached with CAT :7 from the HP71B
I assume all other functions must be from the type :7 with the HP71B

Conlusion:
- in the same HP IL loop (2 different storage drives, 1 video, .. 2 ILPERs)
- untick the IDY Frames in the pilbox bridge
- look at the device info and use directly the number with HP71B
- HP41 reach its first mass storage in the loop
- HP71B reach its own storage in the loop in this case by using :7
- same HP-IL setup can be used by both calculator