Post Reply 
combining hp41 modules into one cartridge
02-13-2018, 02:19 AM
Post: #1
combining hp41 modules into one cartridge
Greetings. Can someone point me to any documentation on shoehorning two ROM circuits into one cartridge? I recall a French article that described how careful soldering and perhaps a little sandpaper could put two 4K ROMs in one package.

Also, for someone expert in this manuever can you put an Extended Memory together w a 8K ROM because the address spaces don’t overlap?

Thanks
Todd
https://github.com/twdeckard/HP41CX-SLANTR?files=1
https://github.com/twdeckard/HP41CX-PLAN...PLAN41.rpn (doomed to
remain incomplete and undebugged)
Find all posts by this user
Quote this message in a reply
02-13-2018, 02:32 AM (This post was last modified: 02-13-2018 02:36 AM by Mark Hardman.)
Post: #2
RE: combining hp41 modules into one cartridge
(02-13-2018 02:19 AM)twdeckard Wrote:  Greetings. Can someone point me to any documentation on shoehorning two ROM circuits into one cartridge? I recall a French article that described how careful soldering and perhaps a little sandpaper could put two 4K ROMs in one package.

Also, for someone expert in this manuever can you put an Extended Memory together w a 8K ROM because the address spaces don’t overlap?

Thanks
Todd
https://github.com/twdeckard/HP41CX-SLANTR?files=1
https://github.com/twdeckard/HP41CX-PLAN...PLAN41.rpn (doomed to
remain incomplete and undebugged)

This thread in the old forums section would be a good place to start:

Double Extended memory module HP41cx..

PeterP references specific issues of PPC:

PPC V11N1 p28 - Procedure for Module Doubling/Tripling
PPC V13N7 p21 - Procedure for Module Doubling/Tripling

If you don't already have a copy of the PPC DVD, it can be purchased for a modest amount from Jake Schwartz at http://www.pahhc.org/ppccdrom.htm.

Ceci n'est pas une signature.
Find all posts by this user
Quote this message in a reply
02-13-2018, 02:48 AM
Post: #3
RE: combining hp41 modules into one cartridge
I plan to do this with two extended memory modules, but I’m going to combine two single density memory modules first, so I have a better chance of success with the extended memory modules.

Try CC41!
Find all posts by this user
Quote this message in a reply
02-13-2018, 03:47 AM
Post: #4
RE: combining hp41 modules into one cartridge
try this:

http://www.hpmuseum.org/guest/klug/dblxmem.pdf
Find all posts by this user
Quote this message in a reply
02-13-2018, 07:49 AM
Post: #5
RE: combining hp41 modules into one cartridge
if you succeed, i would be interested in the empty module shell and connector. Smile Good luck on your project. the pdf linked by Nate Martin is probably the best starting point.
Find all posts by this user
Quote this message in a reply
02-13-2018, 09:22 PM
Post: #6
RE: combining hp41 modules into one cartridge
(02-13-2018 07:49 AM)damaltor Wrote:  if you succeed, i would be interested in the empty module shell and connector. Smile

3D printed Module shells can be found at:
https://www.shapeways.com/product/LSV44R...-inventory
Find all posts by this user
Quote this message in a reply
02-14-2018, 02:15 AM
Post: #7
RE: combining hp41 modules into one cartridge
Thanks!
Find all posts by this user
Quote this message in a reply
02-14-2018, 09:09 AM
Post: #8
RE: combining hp41 modules into one cartridge
(02-13-2018 09:22 PM)Nate Martin Wrote:  
(02-13-2018 07:49 AM)damaltor Wrote:  if you succeed, i would be interested in the empty module shell and connector. Smile

3D printed Module shells can be found at:
https://www.shapeways.com/product/LSV44R...-inventory

Thanks, i have seen that. Still the original shells are nicer, and the connector is hard to build from scratch Smile
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 2 Guest(s)