Post Reply 
Firmware 2021: Problem with exact polar form
04-27-2021, 09:01 PM (This post was last modified: 04-28-2021 01:41 AM by compsystems.)
Post: #1
Firmware 2021: Problem with exact polar form
Hello

Flags: HOME view & RAD MODE (HAngle:=0) & (HComplex:=01).

HAngle:=0; HComplex:=01; [ENTER]

Example 1: ok

input: approx polar form
rectangular_coordinates( 4 ∡ 0.523598775598 ) [ENTER] [ 3.46410161514, 2 ] // OK. a+b*i > 3.46410161514 + 2*i

input: exact polar form
rectangular_coordinates( (4 ∡ (π/6)) ) [ENTER] [ 3.46410161514, 2 ] // OK

input: exact list form
rectangular_coordinates( [ 4, π/6 ] ) [ENTER] [ 3.46410161514, 2 ] // OK

input: approx list form
rectangular_coordinates( [ 4, 0.523598775598 ] ) [ENTER] [ 3.46410161514, 2 ] // OK

polar_coordinates( [ 3.46410161514, 2 ] ) [ENTER] [ 4, 0.523598775598 ] // OK



example 2: Problem

input: exact polar form
rectangular_coordinates( (√(2) ∡ (3*(π/4))) ) [ENTER] Error: Syntax Error Why?

input: approx polar form
rectangular_coordinates( 1.41421356237 ∡ 2.35619449019 ) [ENTER] [ −0.999999999995, 1 ] // OK
a+b*i > −0.999999999995 + i

input: exact list form
rectangular_coordinates( [ √(2) , (3*(π/4)) ] ) [ENTER] [ −0.999999999995, 1 ] // OK

input: approx list form
rectangular_coordinates( [ 1.41421356237, 2.35619449019 ] ) [ENTER] [ −0.999999999995, 1 ] // OK

polar_coordinates( [ −0.999999999995, 1 ] ) [ENTER] [1.41421356237,2.35619449019] // OK
Find all posts by this user
Quote this message in a reply
04-28-2021, 09:22 AM
Post: #2
RE: Firmware 2021: Problem with exact polar form
Hello,

Honestly, I am not 100% sure of the why. This is code I created so long ago...

With a cursory look, it seems that the problem comes from the fact that my parser is not able to recognize "expression"angle"expression" as a complex number.
only number angle "expression" will work.

Unfortunately, this is not an easy fix. sorry

Cyrille

Although I work for the HP calculator group, the views and opinions I post here are my own. I do not speak for HP.
Find all posts by this user
Quote this message in a reply
04-30-2021, 04:43 AM (This post was last modified: 04-30-2021 04:47 AM by compsystems.)
Post: #3
RE: Firmware 2021: Problem with exact polar form
In Home mode, I found the solution: you must put a comma before the Unicode angle symbol

(√ (2), ∡ (3 * (π / 4)))

For those of us who work in the field of teaching circuits in electrical and electronic engineering, we use the option of complex numbers in polar form a lot, is also difficult to remember to place the comma before the angle symbol, for this reason it is very useful to have a template for this purpose. Who else has to enter complex numbers in polar format?

Another useful template is CEILING ⌈▣⌉ AND FLOOR ⌊▣⌋, widely used in algorithmic

[Image: math_templates_hpprime.png]
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 3 Guest(s)