Pasting a program into G2 causes it to crash.

[matalog]

If I paste the following into a newly created program on my new G2, via the connectivity kit, it crashes the G2.

It this a bug, or is it just bad use of a list? I.e. is the List too long?

Code:

EXPORT ball()
BEGIN
    LOCAL COL:={#FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FCEBEBEBh, #CFE6E6E6h, #74E4E4E5h, #2BE3E3E4h, #4E3E2E4h, #26E2E2E4h, #6DE4E4E6h, #D5E7E7E8h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FEF2F2F2h, #B9E2E2E3h, #D9D9DAh, #E1E1E2h, #EBEBECh, #F0F0F2h, #F3F4F5h, #F2F3F4h, #EDEEEFh, #E7E7E8h, #E3E3E4h, #CDE6E6E7h, #FEEFEFF0h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #E8F5F4F5h, #5E5E5E5h, #DEDDDEh, #EBEAEBh, #F4F4F5h, #F8F8FAh, #FBFBFCh, #FDFDFEh, #FEFEFFh, #FEFEFFh, #FDFEFEh, #F6F6F8h, #E6E6E7h, #9DFDFE1h, #F8EBEBEBh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #D1F6F6F6h, #E1DFE1h, #D4D3D5h, #E8E8E9h, #F1F1F2h, #F5F4F7h, #F8F8F9h, #FAFAFCh, #FDFDFEh, #FDFDFDh, #FDFEFDh, #FDFEFDh, #FCFDFDh, #FBFCFEh, #E8E8E8h, #DDDDDEh, #F0E8E8EAh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #E0F7F7F7h, #DFDFDFh, #989799h, #D7D7D8h, #E7E8E9h, #F0F0F1h, #F5F5F6h, #F8F8F9h, #FBFBFCh, #FDFDFDh, #FDFDFCh, #FDFDFCh, #FEFEFCh, #FCFEFEh, #FBFCFDh, #F9FAFBh, #E1E1E2h, #DCDCDDh, #F7E7E7E9h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FAF3F3F3h, #4E5E4E5h, #222626h, #626363h, #DDDCDDh, #E4E4E6h, #EDECEEh, #F2F2F3h, #F6F6F8h, #FAF9FBh, #FCFCFDh, #FDFEFEh, #FDFDFEh, #FDFDFEh, #FBFCFDh, #FAFAFBh, #F6F7F8h, #F0EFF1h, #CBCACCh, #8E2E2E2h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #AEE6E4E6h, #7C7D7Dh, #0h, #4F5050h, #D5D5D5h, #DFDFDFh, #E7E7E8h, #ECEDEDh, #F3F2F3h, #F8F7F9h, #FBFAFBh, #FBFCFDh, #FBFCFDh, #FAFBFCh, #F9FAFBh, #F7F8FAh, #F3F4F5h, #F0EFF2h, #C0BFC0h, #D2D1D2h, #CCE6E6E7h, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FCECEBECh, #D1D0D1h, #313130h, #20202h, #2C2D2Eh, #BCBDBCh, #D9D9D9h, #E1E1E1h, #E7E8E7h, #EFF0EFh, #F5F5F6h, #F7F8F8h, #F9F8F9h, #F9F8F9h, #F8F7FAh, #F7F7F9h, #F5F6F7h, #F0F0F1h, #E9E8EAh, #B4B3B4h, #C1BFC1h, #E3E3E4h, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #E5DEDDDEh, #BBBBBBh, #1F1F1Fh, #30404h, #C0F10h, #797978h, #D4D5D4h, #DADBDAh, #E4E4E4h, #EBECEBh, #F0F0F0h, #F4F4F4h, #F5F5F5h, #F4F4F5h, #F2F3F3h, #F1F1F3h, #F0EFF1h, #EBEAECh, #D9D7D9h, #A8A6A8h, #BBB9BBh, #DEDCDEh, #F3E8E7E8h, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #A9D4D4D4h, #B3B3B3h, #1F1F1Fh, #10101h, #60707h, #202222h, #A7A8A7h, #CDCDCDh, #D6D6D6h, #DEDEDEh, #E6E6E6h, #EEEEEEh, #F4F4F4h, #F7F7F8h, #F5F5F5h, #EFEEEFh, #EAE8EAh, #E0DFE1h, #B7B6B7h, #A2A0A1h, #B8B6B8h, #D7D6D7h, #B7E5E4E5h, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #4ECFCFCFh, #BABABAh, #343434h, #0h, #30303h, #20202h, #1F1F1Fh, #2A2A2Ah, #272728h, #302F2Fh, #393838h, #424242h, #525252h, #6B6B6Bh, #89898Ah, #A09FA0h, #B5B3B5h, #B3B1B3h, #969596h, #A5A4A4h, #B4B1B3h, #D3CFD3h, #58E2E1E2h, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #8CECECEh, #BFBFBFh, #656565h, #0h, #10101h, #0h, #70001h, #1F1719h, #171011h, #C0606h, #10000h, #0h, #0h, #0h, #0h, #50607h, #323230h, #908E8Ch, #989698h, #9F9E9Fh, #B7B6B7h, #CFCECEh, #9DDDBDDh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #54D0D0D0h, #C1C1C1h, #A0A1A1h, #2B2A2Ah, #30000h, #191112h, #424141h, #5E5F5Fh, #686868h, #696969h, #5E5E5Eh, #4C4C4Ch, #4C4C4Ch, #59595Ah, #686868h, #79797Ah, #8D8B8Ah, #9E9B9Ah, #969495h, #9F9D9Eh, #BFBDBEh, #CDCBCCh, #5AD9D7D9h, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #B6D5D6D6h, #C2C2C2h, #ABACACh, #7C7D7Dh, #2B2929h, #404040h, #616161h, #717171h, #7E7E7Eh, #898989h, #8E8E8Eh, #929292h, #999999h, #9F9F9Fh, #A1A0A1h, #9E9D9Eh, #9D9C9Dh, #979496h, #918E8Fh, #B2AFAFh, #C4C1C1h, #CBC8CAh, #C0D6D4D6h, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #EFDFDFDFh, #C5C5C5h, #B2B2B2h, #A8A9A9h, #898989h, #5D5D5Dh, #666666h, #787877h, #838382h, #8D8D8Dh, #909090h, #929292h, #999798h, #A2A0A1h, #A5A2A3h, #A2A1A2h, #9D9C9Dh, #949294h, #ACA8A8h, #C0BCBCh, #C4C1C2h, #CCC9CCh, #F3DDDADDh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FEE7E7E7h, #CECECEh, #C2C2C2h, #B4B4B4h, #AEAFAFh, #9D9E9Eh, #858585h, #7C7C7Ch, #808081h, #8D8C8Ch, #8F8D8Eh, #908E8Fh, #959293h, #9B9899h, #9F9C9Ch, #9E9C9Dh, #A4A1A2h, #B5B0B1h, #C2BCBDh, #C3BFBFh, #C5C3C4h, #CFCDCFh, #FEECEBECh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #C8D8D8D8h, #CBCACAh, #BDBDBDh, #B6B6B6h, #B4B3B3h, #AFAFAFh, #A4A3A3h, #999698h, #959293h, #949192h, #959394h, #9A9798h, #9F9B9Bh, #A6A3A3h, #B0ACACh, #BBB6B7h, #C0BCBCh, #C2BEBEh, #C3C1C0h, #C8C6C7h, #BED8D6D9h, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FCE6E6E5h, #8D2D1D2h, #C9C7C7h, #BCBABAh, #B7B5B5h, #B6B4B4h, #B8B5B5h, #B5B1B1h, #B3ADAEh, #B0ABABh, #B0ACACh, #B2AEAEh, #B7B1B2h, #BAB5B5h, #BDB9B9h, #C1BBBCh, #C1BEBEh, #C3C0C1h, #C7C4C5h, #8CCCACCh, #FBE9E9E9h, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #E5DEDDDDh, #D2D1D2h, #C9C7C8h, #BEBCBCh, #BAB7B7h, #B9B6B6h, #B6B4B3h, #B8B4B4h, #B9B4B5h, #BAB5B6h, #BCB7B8h, #BCB8B8h, #BEB8B9h, #C0BABBh, #C2BCBDh, #C3BFBFh, #C6C4C5h, #CBC9CBh, #EADBDADAh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #D3D7D6D7h, #D5D5D5h, #D2D1D2h, #C9C7C7h, #BEBBBBh, #BAB6B6h, #BAB7B7h, #BBB6B7h, #BBB7B7h, #BDB8B8h, #BCB7B7h, #BDB8B7h, #BEB9B9h, #C1BCBDh, #C5C2C2h, #CAC8C9h, #E7D6D5D5h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #E5DBDADAh, #7D3D3D3h, #D4D3D3h, #D0CECEh, #CAC7C6h, #C7C4C3h, #C7C3C2h, #C7C3C3h, #C6C2C2h, #C5BFC0h, #C5C1C1h, #C8C5C5h, #CAC8C9h, #CCDCBCCh, #F5DAD9D8h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FBDCDCDCh, #B9CCCCCBh, #CAC9C9h, #C8C6C6h, #C6C3C3h, #CECACAh, #CECBCBh, #CECBCBh, #C9C8C8h, #C8C6C6h, #C8C5C6h, #E2CBCACAh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FDE0E0DFh, #EAC9C8C8h, #AEB2B1B2h, #55BCBCBBh, #9D0D0D0h, #5FD2D2D2h, #C6C7C7C6h, #F7CCCBCBh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FFFFFFFFh, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h, #FF000000h};

DIMGROB_P(G1,26,26,RGB(255,255,255,255));
DIMGROB_P(G2,320,240);
DIMGROB_P(G3,320,240);

  BLIT_P(G2,0,0,320,240,G0,0,0,320,240);
  BLIT_P(G3,0,0,320,240,G0,0,0,320,240);
  //BLIT_P(G4,0,0,320,240,G0,0,0,320,240);

    LOCAL J,K,S,J1,K1,X,Y,T;
    LOCAL VX,VOY,AOY,MOXH;
  J:=160;
  K:=120;
  J1:=J;
  K1:=K;
  X:=15;
  Y:=210;
  MOXH:=0;
  VX:=50;
  VOY:=20;
  AOY:=0.7;
  T:=1;
 // G1:=AFiles("b3l.png");
 //AVars("g3"):=G1;

 FOR Y FROM 0 TO 25 DO
    FOR X FROM 0 TO 25 DO

  //RECT_P(25,25,100,110);
  //TEXTOUT_P(GETPIX_P(G1,X,Y),30,30);
   //TEXTOUT_P(X,50,50);
   //TEXTOUT_P(Y,70,70);
  PIXON_P(G1,X,Y,COL(T));
T:=T+1;
    END;
  END;
REPEAT

  VOY:=VOY+AOY;
  X:=X+VX;
  Y:=Y+VOY;

IF Y<MOXH THEN MOXH:=Y; END;
IF Y>216 THEN MOXH:=216; VOY:=-VOY*0.95; VX:=VX*0.95; END;
IF MOXH=216 THEN Y:=216;END;
IF X>296 THEN VX:=-VX*0.95; X:=296;END;
IF X<0 THEN X:=0; VX:=-VX*0.95; END;
  //TEXTOUT_P(MOUSE(1),0,30);
  //TEXTOUT_P(MOUSE(2),0,60);
  J:=X;
  K:=Y;
  BLIT_P(G2,J1,K1,J1+25,K1+25,G3,J1,K1,J1+25,K1+25);
  BLIT_P(G2,J,K,G1,0,0,25,25);
    //BLIT_P(G2,J1,K1);  
    BLIT_P(G2);
// TEXTOUT_P(VX,0,0);
//TEXTOUT_P(Y,50,50);
  J1:=J;
  K1:=K;
//Y:=Y-1;

WAIT(0.04);

//IF VX<0.3 AND Y=216 THEN BREAK(3);END;

 // WAIT(0.001);
// REPEAT
 // IF ISKEYDOWN(7) THEN J:=J-2;S:=1; END;
 // IF ISKEYDOWN(8) THEN J:=J+2;S:=1; END;
 // IF ISKEYDOWN(2) THEN K:=K-2;S:=1; END;
 // IF ISKEYDOWN(12) THEN K:=K+2;S:=1; END;
//S:=1;
 // J:=MOUSE(0);
 // K:=MOUSE(1);
  IF ISKEYDOWN(4) THEN BREAK(3); END;
 // UNTIL S=1;
 // S:=0;
UNTIL 0;
    

END;

[StephenG1CMZ]

So, how long is COL?
I wasn’t sure how long to keep scrolling right for
An actual list can have 10 000 items...
But I don’t know about line length.

[matalog]

(05-28-2021 09:37 PM)StephenG1CMZ Wrote:  So, how long is COL?
I wasn’t sure how long to keep scrolling right for
An actual list can have 10 000 items...
But I don’t know about line length.

It was created, and is loaded by 2 nested FOR loops, from 0 to 25, so , let's assume it is 26x26=676 hex numbers, which potentially contain 4x8 bit numbers.

Is there a way to limit the line length of a List, and take a new line within a List? Is it just a matter of inserting a new line in the program?

[Liamtoh Resu]

Try editing the program on the prime.

See if there are extra characters of the last END;
and then delete them.

I have preveiously seen this phenomena.

Sure enough. I created the new program ball using the CK.
The prime g2 rebooted at least once. I finally connected and
pasted your text for the ball program.

I edited the ball program directly on the prime g2 and found
about five extra bytes appended to the program and deleted them.

The ball program passed the program check.

The program was then ran-- a ball was bouncing around in front of the
text on the screen until I hit the Esc key.

And then I actually looked at the source code.

Hitting the down feature of the circular touch pad slowed down the ball
and it eventually settled down at the bottome of the screen.

Question: Are you using any reference material besides the HP prime User's Guide?
I admit I have not rtfm'd the guide yet. I have been looking at running micropython
on the prime g.

BTW: I am using the 20210505 firmware and the 2020 CK software. I use notepad as
in intermediate copy/paste buffer from the code on the blog.

[matalog]

(05-28-2021 10:40 PM)Liamtoh Resu Wrote:  Try editing the program on the prime.

See if there are extra characters of the last END;
and then delete them.

I have preveiously seen this phenomena.

Sure enough. I created the new program ball using the CK.
The prime g2 rebooted at least once. I finally connected and
pasted your text for the ball program.

I edited the ball program directly on the prime g2 and found
about five extra bytes appended to the program and deleted them.

The ball program passed the program check.

The program was then ran-- a ball was bouncing around in front of the
text on the screen until I hit the Esc key.

And then I actually looked at the source code.

Hitting the down feature of the circular touch pad slowed down the ball
and it eventually settled down at the bottome of the screen.

Question: Are you using any reference material besides the HP prime User's Guide?
I admit I have not rtfm'd the guide yet. I have been looking at running micropython
on the prime g.

BTW: I am using the 20210505 firmware and the 2020 CK software. I use notepad as
in intermediate copy/paste buffer from the code on the blog.

I connected and tried to paste this code twice. I gave up and pasted it in 2 halves, and it worked.

The G2 is supposed to be 100% compatible with the G1 prime, no? This works on the G1 Prime, and Pastes fine.

I can get this to run on G2, but that was not my original problem, the problem is that it crashes the device upon Paste!

I am using reference material that is available for the G1 and G2, equally! The HP Prime Guide! The 2018 version, the PDF, That we download from the site.

Thanks for looking, and I hope we learn something from this.

Matalog.

[toml_12953]

It didn't crash for me. I tried two ways.
1. I created a new program in the CK and pasted the text into that, Then I saved it.

2. I created a new program on the virtual calculator, pasted into that, saved it and copied it to the physical calc.