USRLIB52 for EMU71

[zixingcheche]

Hello,

Now, I installed the Emu 71, Ver1.17. I could install .Bin files on this Emu.
and it works great.

But I want to try the USRLIB52 on this Emu 71. I downloaded the USRLIB from this site:
http://www.jeffcalc.hp41.eu/emu71/index.html#ulib52

How to use the file:USRLIB52.LIF ?

Please give me some instructions, thanks!

[rprosperi]

USRLIB52.LIF is a LIF Volume, an image of a disk or tape file, originally stored on an HP-IL device. You need to install Christoph's IL-Per (which simulates HP-IL devices) and 'connect' Emu71 to IL-Per via TCP/IP, which sounds complex but really is pretty straightforward.

Here is the site for IL-Per, download ILPer v2.42 and install and read this page a couple times. Initially it can seem complex, but in fact is pretty straightforward.

https://hp.giesselink.com/hpil.htm

Once installed and working, you would 'open' the USBLIB52.LIF file in the 1st drive of ILPer, which will appear as the fist mass storage device on the IL LOOP, so then you can use commands such as:

CAT :TAPE(1) - see a catalog of files ion the LIF volume
COPY USRLIB52:TAPE(1) TO :MAIN (or to :PORT(1), or wherever you want the LEX file stored)

[zixingcheche]

Hi Bob,

Thank you so much for your reply.
I did try it. according to the instructions.

--loaded the usrlib.52 on the 1st drive of ILper.
--input command "CAT:TAPE(1)", then got the result: (picture 1)
ULIB52 LEX 6382 09/ 03/15 18:54
it works...

--input copy command, I met errors..
COPY USRLIB52:TAPE(1) TO: PORT(5)
error comes.

any suggestions? please give me some help...
Thanks!