Post Reply 
Hp 150 touchscreen keyboard (1980s)
10-10-2024, 05:43 PM
Post: #1
Hp 150 touchscreen keyboard (1980s)
Hi

I'm looking for a keyboard for an HP150 touchscreen computer from the 1980s

Thank you!

Goncal
Find all posts by this user
Quote this message in a reply
10-16-2024, 01:47 PM
Post: #2
RE: Hp 150 touchscreen keyboard (1980s)
Old Touchscreen without HIL or Touchscrenn II?
Ralf

/41/48/
Find all posts by this user
Quote this message in a reply
10-16-2024, 05:19 PM
Post: #3
RE: Hp 150 touchscreen keyboard (1980s)
Hello,

I still have the computer, but I doubt that I will ever get it running again, so I can part with the keyboard if necessary. Mine has the german key labes which might be a show stopper.

I attach pictures of the front side (should have cleaned it a little as it was stored in the garage for 24 years) and the back label.

The same keyboard (HP 46010 AD, the "AD" might designate the german layout) was used for various terminals and unix workstations from HP as well, so it might be worth to look in that direction too.

Regards
Max

[Image: 20241016_171535_1024px.jpg]

[Image: 20241016_171548_1024px.jpg]
Find all posts by this user
Quote this message in a reply
10-17-2024, 12:58 PM
Post: #4
RE: Hp 150 touchscreen keyboard (1980s)
(10-16-2024 05:19 PM)Maximilian Hohmann Wrote:  was used for various terminals and unix workstations from HP as well, so it might be worth to look in that direction too.

Ah good to know, i have a 700/94 terminal to cannibalize, it has a us layout.
I will look for it. Has it a 4 pin western type plug?
Ralf

/41/48/
Find all posts by this user
Quote this message in a reply
10-17-2024, 01:15 PM
Post: #5
RE: Hp 150 touchscreen keyboard (1980s)
(10-17-2024 12:58 PM)Hiwi Wrote:  Has it a 4 pin western type plug?

Yes.
Find all posts by this user
Quote this message in a reply
10-18-2024, 08:59 AM (This post was last modified: 10-18-2024 09:00 AM by Martin Hepperle.)
Post: #6
RE: Hp 150 touchscreen keyboard (1980s)
There is an extensive list of HP keyboards at
https://groups.io/g/VintHPcom/table?id=1...C1%2C0%2C0

Modern HP Terminals like the 700 series used 5V while older ones like the 239x as well as the HP 150 used 12V.

So even if the connectors match, you can easily damage keyboard or computer.

Martin
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 4 Guest(s)