Threaded Mode | Linear Mode

amindanial · (This post was last modified: 11-19-2024 08:57 PM by amindanial.)

Unfortunately, HP Connectivity Kit cannot connect with Moravia server to check for firmware update as shown in the following image:

The version of HP Connectivity Kit:

DA74254 · 11-19-2024, 10:24 PM

What is your system? (Win, Mac, Linux?)
I noticed many moons ago when installing a fresh connkit to a new PC (Win), that I had to manually configure the FireWall to allow Connkit to connect.
Might be worth a check.

BruceH · (This post was last modified: 11-19-2024 11:05 PM by BruceH.)

http://www.moravia-parts.com seems to be broken at the moment. It is redirecting to https://www.eetgroup.com/cs-cz and, unsurprisingly, there is no update file at that location so the connectivity kit throws an error.

I've no idea why or how Moravia have lost control of their website but it doesn't look good.

RPNerd · 11-20-2024, 06:49 AM

(11-19-2024 11:04 PM)BruceH Wrote: I've no idea why or how Moravia have lost control of their website but it doesn't look good.

He's probably aware of this already but just in case, I've put this on Radim's radar.

RPNerd · 11-20-2024, 07:36 AM

They sold the moravia-parts.com domain to a spare parts business but didn't realise that the connectivity kit used the domain.

Radim Frydrych · 11-20-2024, 07:57 AM

Hi,

Our HP spare parts business was taken over by EET and we didn't realise during the transition that the HP Prime ConnKits were on the spare parts server. We are working on this with Jeff and it should be fixed soon. Thank you for your patience.

Radim

TedB · 11-20-2024, 07:04 PM

Having just acquired my Prime I was confused by the lack of connectivity when using the HP Connectivity Kit! I was getting the same screen as the OP. Hopefully this can be sorted soon. I managed to update the firmware to 2.2.15157 (2024-09-01) using the links in the hpcalc.org website.

amindanial · 11-23-2024, 09:24 PM

(11-20-2024 07:57 AM)Radim Frydrych Wrote: Hi,

Our HP spare parts business was taken over by EET and we didn't realise during the transition that the HP Prime ConnKits were on the spare parts server. We are working on this with Jeff and it should be fixed soon. Thank you for your patience.

Radim

Now the following error pops up.

RPNerd · 11-24-2024, 06:58 AM

Not sure if you were expecting it to suddenly start working without an update from Moravia. The CK is still pointing to the old domain and that domain no longer belongs to Moravia Consulting.

It's not going to work any time soon unless we get an update of the CK that points to another domain, the correct domain.