Bug with EDITMAT()

[bobkrohn]

From Home. on actual calculator
EDITMAT() seems to work with built-in Matrix variables like M1.
Try to use a user defined Matrix and you discover a BUG.

Locks up the calculator.
on Reset you find your user defined Matrix has disappeared.

It seems to be OK on Emulator

[Snorre]

Hi Bob,

I couldn't reproduce this behaviour on my device as couldn't reproduce the other bug you mentioned about digits in program/function names ("V4L1DN4M3" is a valid name) [EDIT: could reproduce the latter].

It seems that something's odd with your device. Have you already tried a hard reset (Turn off, then press and hold [Templ]+[Power]+[Comma], then switch on, then release, finally -- in diagnostic mode -- select [9] Reset). Beware, you'll wipe your data (make a backup).

[EDIT #2]: Forget about it! First check if your current app is "Spreadsheet" and if your matrix' name collides with a cell's name (maybe it's similiar to this issue).

[Han]

(12-18-2014 10:26 AM)bobkrohn Wrote:  From Home. on actual calculator
EDITMAT() seems to work with built-in Matrix variables like M1.
Try to use a user defined Matrix and you discover a BUG.

Locks up the calculator.
on Reset you find your user defined Matrix has disappeared.

It seems to be OK on Emulator

Is your firmware up to date?

[bobkrohn]

Yes firmware it's up to date. Dec 03 2014 version.

Speadsheet is active but there is nothing in it.

I entered numeric data into M1 then Stored to my custom named variabe

i.e. M1>KoGo

I'll try everything again tomorrow.

Had to reset with a pin in the hole on back.