Post Reply 
Prime Unit Conversion
12-26-2017, 04:53 AM
Post: #1
Prime Unit Conversion
On the beta version, in viscosity, (m^2)/s and St conversion attempts to P both produce an inconsistent units error
Find all posts by this user
Quote this message in a reply
12-26-2017, 12:50 PM (This post was last modified: 12-26-2017 01:04 PM by roadrunner.)
Post: #2
RE: Prime Unit Conversion
They are different units. One is kinematic viscosity and one is dynamic viscosity. Maybe they will add a kg/(m.s) choice to the list in a future release.

edit: lbm/(ft.hr) and ft^2/s would also be nice

-road
Find all posts by this user
Quote this message in a reply
12-26-2017, 02:15 PM
Post: #3
RE: Prime Unit Conversion
It then appears as if there is no conversion choice for P...
Find all posts by this user
Quote this message in a reply
12-26-2017, 09:43 PM (This post was last modified: 12-26-2017 09:44 PM by JMB.)
Post: #4
RE: Prime Unit Conversion
(12-26-2017 02:15 PM)lrdheat Wrote:  It then appears as if there is no conversion choice for P...

You can convert between P (poise) and Pa·s (pascal·second): 1 P = 0.1 Pa·s

For example, CONVERT(15_P, 1_Pa*s) returns 1.5_Pa*s
Find all posts by this user
Quote this message in a reply
12-27-2017, 12:45 AM
Post: #5
RE: Prime Unit Conversion
On my beta 13011 version OS, I only have a viscosity choice of (m^2)/s, St, and P (choices 4,7,8 no other options are shown)
Find all posts by this user
Quote this message in a reply
12-27-2017, 11:02 AM
Post: #6
RE: Prime Unit Conversion
You must enter it yourself, convert(15_P,1_Pa*s), P, Pa and s are available, so you enter the first part until 1_Pa, go back into the brackets and key in *s. For me that works and is the usual way I use to convert to combined units.
Arno
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)