Greetings from Germany
|
07-27-2019, 02:47 PM
Post: #21
|
|||
|
|||
RE: Greetings from Germany
(07-27-2019 01:08 PM)Karl-Ludwig Butte Wrote: [.....] Hello Karl, thank you for the tips....as soon as it is necessary I will try it. At the moment the card reader works excellent. And you know: never change a running system :-) Greetings Thomas http://www.dg8fbv.de 41CX, Card R., Barcode R., X-Function, X-Memory, Advntg-Modul, HP41 Printer, 82200A Touchpad, 48GX black LCD, 50g, Prime G2 |
|||
07-27-2019, 04:35 PM
(This post was last modified: 07-27-2019 04:35 PM by HP-Collection.)
Post: #22
|
|||
|
|||
RE: Greetings from Germany
Auch ich grüsse dich herzlich und heisse dich willkommen. Ich komme aus Basel. Vielleicht trifft man sich im 2020 an nächsten Allschwil Meeting.
Matthias http://www.hp-collection.org (ja, meine Sammlung ist noch etwas grösser) |
|||
07-27-2019, 04:40 PM
Post: #23
|
|||
|
|||
RE: Greetings from Germany
For the transportation roll if I use silicone tubing I use the thing that is sold as Tygon F-4040-A with id 3.2mm (1/8''), od 6.4mm (1/4''). I.e. the same thing you can find in Katie's old postings.
Sometimes I use rubber O-rings. Some card readers don't like the tubing so much ... |
|||
07-27-2019, 06:36 PM
Post: #24
|
|||
|
|||
RE: Greetings from Germany
(07-27-2019 04:35 PM)HP-Collection Wrote: Auch ich grüsse dich herzlich und heisse dich willkommen. Ich komme aus Basel. Vielleicht trifft man sich im 2020 an nächsten Allschwil Meeting. Hallo Matthias, Danke für das Willkommen. I can not believe what I see. What a amazing collection..... How long took it, to collect all this parts? Most of them I see the first time. You can be proud of this extraordinary collection...... Greetings Thomas http://www.dg8fbv.de 41CX, Card R., Barcode R., X-Function, X-Memory, Advntg-Modul, HP41 Printer, 82200A Touchpad, 48GX black LCD, 50g, Prime G2 |
|||
07-27-2019, 06:54 PM
Post: #25
|
|||
|
|||
RE: Greetings from Germany
(07-27-2019 04:40 PM)AndiGer Wrote: For the transportation roll if I use silicone tubing I use the thing that is sold as Tygon F-4040-A with id 3.2mm (1/8''), od 6.4mm (1/4''). I.e. the same thing you can find in Katie's old postings. Hello, thank you for the information. Currently I use two O-rings at the drive shaft and fix it at the shaft with superglue. It works fine up to now. For the adjustment of the drive roll I didn’t follow the service manual, measuring the motor current (see attachment). I listen to the motor sound were it sounds equal and not “stressed”.. Greetings Thomas http://www.dg8fbv.de 41CX, Card R., Barcode R., X-Function, X-Memory, Advntg-Modul, HP41 Printer, 82200A Touchpad, 48GX black LCD, 50g, Prime G2 |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 4 Guest(s)