Post Reply 
The little number in the HP 30b version
07-22-2021, 07:37 PM
Post: #1
The little number in the HP 30b version
When ON+PMT is pressed on the HP 30b, then down-arrow is pressed 4 times, the display shows the "SW Version" as a date followed by a small digit in the exponent area.

The following are the SW Versions on my two 30b's, with the trailing digit being very small:

10 01 2009 ... 4
10 27 2009 ... 2

This puzzles me, since the American-format date increased, but the trailing digit decreased. Anybody know what that tiny digit refers to?

<0|ɸ|0>
-Joe-
Visit this user's website Find all posts by this user
Quote this message in a reply
07-22-2021, 10:30 PM (This post was last modified: 07-22-2021 10:31 PM by BruceH.)
Post: #2
RE: The little number in the HP 30b version
4 5 2010 ... 1

for me, so a later date but a lower number.
Find all posts by this user
Quote this message in a reply
07-22-2021, 10:41 PM
Post: #3
RE: The little number in the HP 30b version
The little number appears to be the day of the week, counting Monday as 1, Tuesday as 2, etc.

Fits those three numbers, which makes me suspect that's it.

May ** not ** be the day of the week but those three dates follow that pattern.
Find all posts by this user
Quote this message in a reply
07-23-2021, 01:13 AM
Post: #4
RE: The little number in the HP 30b version
(07-22-2021 10:41 PM)Gene Wrote:  The little number appears to be the day of the week, counting Monday as 1, Tuesday as 2, etc.

Fits those three numbers, which makes me suspect that's it.

May ** not ** be the day of the week but those three dates follow that pattern.

Oh my goodness, that's awesome! That must be it, because the built-in Date function uses exactly the same display, with the day of week showing in the exponent area. So the Version screen just called the Date code to display the version date... and the day of week is an unnecessary byproduct. Very cool! Thanks, Gene!

<0|ɸ|0>
-Joe-
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 1 Guest(s)