Post Reply 
HHC 2022 videos posted
09-19-2022, 02:18 AM (This post was last modified: 11-01-2022 06:21 PM by Eric Rechlin.)
Post: #1
HHC 2022 videos posted
I'm surprised there has been no post-HHC discussion (aside from the programming contest), so I will start a thread! I think everyone had a great time, and we even had several first-time attendees.

As I have done at every conference since 2010, I made video recordings of the talks. This year I upgraded my primary camera to a 4K model, with the old primary (1080p) camera now being the secondary one, so video quality should be substantially improved over past years.

I have now uploaded all the videos of the talks that I recorded during the HHC 2022 conference in Nashville. The following 13 hours, 54 minutes, and 8 seconds of videos are now available for viewing:

Calculator Patents and How to Find Them (Felix Gross): 18:47
TI-88 Part 1: History and Go / No Go Decision (Gene Wright): 41:30
TI-88 Hardware Tour (Richard Nelson) 31:58
Autonomous Vehicle Status - Tesla's Full Self Driving in 2022 (David Ramsey): 56:04
What's New on the HHC 2022 USB Drive (Eric Rechlin): 21:01
What's New in the PPC Archive (Jake Schwartz): 21:32
When Odran was New (Bob Prosperi): 67:54
TI-88 Part 2: Features, Comparisons, and Verdict (Gene Wright): 96:11
HP-75 Software Development System Prototype (Charles McCord): 17:04
Everything But The Kitchen Sink (David Ramsey): 20:30
Voyager Single Chip Series 10 (SST) (Charles McCord): 37:10
Advanced HP-IL Communication (Sylvain Côté): 70:34
HP-10 Calculator with Focus on the HP-10 Printer (Jim Johnson): 18:51
Bobcat Prototype (Charles McCord): 11:26
Calculator Humor (Gene Wright): 1:40
APF Calculators (Gene Wright): 20:58
HP Calculators Distribution (Klaas Kuperus): 59:45
Literature Archive Update (Eric Rechlin): 30:32
Project 997: New Simple PRNGs For Calculators (Namir Shammas) 31:36
Plus42: Advanced Equation Editor Functions (Edward Shore): 37:52
Actuarial Math - Adding mortality to the time value of money (Gene Wright): 35:09
Texas Instruments SR-60A Programmable Calculator (David Ramsey): 36:23
The Best Empirical Multiple Regression Model (Namir Shammas): 27:04
HP-41 MAXX Module (Sylvain Côté): 20:09
Contest Winners (Gene Wright and Richard Nelson): 2:28
Visit this user's website Find all posts by this user
Quote this message in a reply
09-19-2022, 07:54 AM (This post was last modified: 09-19-2022 07:55 AM by vaklaff.)
Post: #2
RE: HHC 2022 videos posted
I've never been to any HHC and likely will never be. I am so so grateful for the recordings! Thank you everybody who contributed in any way.

The weekend was very rainy here, I managed to devour most the the talks. Interesting and fun stuff, thanks again!
Find all posts by this user
Quote this message in a reply
09-19-2022, 12:30 PM
Post: #3
RE: HHC 2022 videos posted
Indeed, HHC 2022 was an excellent time, no collection of geeks have had a better time in many years.

The new higher-res videos are truly excellent and the split-screen format capturing the speaker (or commenter from the audience) and the slides simultaneously are very effective for preserving the feeling of the live presentation.

Well done, thanks for the efforts at HHC and the quick editing work after getting home in order to post these so quickly. Smile

--Bob Prosperi
Find all posts by this user
Quote this message in a reply
09-19-2022, 01:00 PM
Post: #4
RE: HHC 2022 videos posted
Thank you again Eric for taking these videos and posting them for all of us that could not attend.
I am having a great time starting with the TI-88 videos. I love after all of the negative comments that Tony Barlow had in his TI-88 beta test memo (see picture below) how he ended it with; "All negative remarks notwithstanding, I wish you best of luck with the eventual TI-88 and hope that it will make you all rich and famous". Priceless!
   

Here is the official TI announcement leaflet for the TI-88 before they canceled it.
http://www.datamath.net/Leaflets/TI-88_Announcement.pdf
Visit this user's website Find all posts by this user
Quote this message in a reply
09-19-2022, 01:28 PM
Post: #5
RE: HHC 2022 videos posted
Thanks for your effort in making these videos and making them available. The video and audio quality is excellent.
Find all posts by this user
Quote this message in a reply
09-19-2022, 04:20 PM
Post: #6
RE: HHC 2022 videos posted
I started binging once the videos started to trickle in on the Tube Smile

The cliffhanger was to get part II of the 88 journey - I genuinely enjoyed that Gene!

There were several instances during the videos I got to see the "arguing" of what is IN and what's NOT IN a product before it goes to manufacturing. This is close to how it actually works - 2 dozen experts arguing what the product is going to be "my idea is the key one" and then "well, we don't have the resource, or the time" or "that's another product for a different market" - I have been there....

The TI story was one of how NOT to have that conversation... - Naïve Individuals.... as a business segment.... OMG

Thanks for having sound and video nailed!!!
Find all posts by this user
Quote this message in a reply
09-20-2022, 01:49 AM
Post: #7
RE: HHC 2022 videos posted
(09-19-2022 02:18 AM)Eric Rechlin Wrote:  I'm surprised there has been no post-HHC discussion (aside from the programming contest), so I will start a thread! I think everyone had a great time, and we even had several first-time attendees.

As I have done at every conference since 2010, I made video recordings of the talks. This year I upgraded my primary camera to a 4K model, with the old primary (1080p) camera now being the secondary one, so video quality should be substantially improved over past years.

I have now uploaded all the videos of the talks that I recorded during the HHC 2022 conference in Nashville. The following 10 hours and 18 minutes of videos are now available for viewing:

Calculator Patents and How to Find Them (Felix Gross): 18:47
TI-88 Part 1: History and Go / No Go Decision (Gene Wright): 41:30
TI-88 Hardware Tour (Richard Nelson) 31:58
Autonomous Vehicle Status - Tesla's Full Self Driving in 2022 (David Ramsey): 56:04
What's New on the HHC 2022 USB Drive (Eric Rechlin): 21:01
What's New in the PPC Archive (Jake Schwartz): 21:32
When Odran was New (Bob Prosperi): 67:54
TI-88 Part 2: Features, Comparisons, and Verdict (Gene Wright): 96:11
Everything But The Kitchen Sink (David Ramsey): 20:30
HP-10 Calculator with Focus on the HP-10 Printer (Jim Johnson): 18:51
Calculator Humor (Gene Wright): 1:40
APF Calculators (Gene Wright): 20:58
Literature Archive Update (Eric Rechlin): 30:32
Project 997: New Simple PRNGs For Calculators (Namir Shammas) 31:36
Plus42: Advanced Equation Editor Functions (Edward Shore): 37:52
Actuarial Math - Adding mortality to the time value of money (Gene Wright): 35:09
Texas Instruments SR-60A Programmable Calculator (David Ramsey): 36:23
The Best Empirical Multiple Regression Model (Namir Shammas): 27:04
Contest Winners (Gene Wright and Richard Nelson): 2:28

The following three talks will be published after the London HPCC conference October 22/23:

HP-75 Software Development System Prototype (Charles McCord): 17:04
Voyager Single Chip Series 10 (SST) (Charles McCord): 37:10
Bobcat Prototype (Charles McCord): 11:26

The following two talks will be published after the Allschwil conference October 28/29:

Advanced HP-IL Communication (Sylvain Côté): 70:34
Surprise Special Product Announcement (Sylvain Côté): 20:09

In total, that means I recorded 12 hours, 54 minutes, and 23 seconds of talks.

There was also a Zoom video conferencing session with Klaas Kuperus. A screen recording of that talk will be posted at a later date.

Well done, as always, Eric. And always grateful to you and Jake for taping and posting the presentations.

The days really fly by.
Visit this user's website Find all posts by this user
Quote this message in a reply
09-20-2022, 02:45 PM
Post: #8
RE: HHC 2022 videos posted
Good morning all...

I wasn't able to attend this year because of work. (I do engineering contract work as a consultant now.) So these are great fun for me.

With more than 12 hours of talks, I'll be busy for awhile!

Thanks Eric for all your hard work.

-=d
Visit this user's website Find all posts by this user
Quote this message in a reply
09-27-2022, 07:22 PM
Post: #9
RE: HHC 2022 videos posted
Hello All,

Attended my first HHC Conference this year. What a great time. It was wonderful to meet people whose work I have been reading and learning from for years. And I got to ride in a self driving Tesla. Thank you Dave. Thank you all.

Hey Eric,

Checked my library and I have a spiral bound “ An Easy Course in Using the HP 16C”. Let me know if you would like me to mail it for scanning.

Regards, Rick
Find all posts by this user
Quote this message in a reply
09-27-2022, 07:47 PM
Post: #10
RE: HHC 2022 videos posted
I knew this existed, but have not seen one - yes please do share this with Eric for us all to have a look…!

(09-27-2022 07:22 PM)RPZ Wrote:  Hello All,

Attended my first HHC Conference this year. What a great time. It was wonderful to meet people whose work I have been reading and learning from for years. And I got to ride in a self driving Tesla. Thank you Dave. Thank you all.

Hey Eric,

Checked my library and I have a spiral bound “ An Easy Course in Using the HP 16C”. Let me know if you would like me to mail it for scanning.

Regards, Rick
Find all posts by this user
Quote this message in a reply
09-27-2022, 10:53 PM
Post: #11
RE: HHC 2022 videos posted
(09-27-2022 07:22 PM)RPZ Wrote:  Hello All,

Attended my first HHC Conference this year. What a great time. It was wonderful to meet people whose work I have been reading and learning from for years. And I got to ride in a self driving Tesla. Thank you Dave. Thank you all.

Hey Eric,

Checked my library and I have a spiral bound “ An Easy Course in Using the HP 16C”. Let me know if you would like me to mail it for scanning.

Regards, Rick

That would be fantastic. I sent you an email with my address. Thank you!

Also, since the conference, I purchased a copy of "An Easy Course in Using the HP 17BII", and it's quite a bit different from the 17B version of the book. It's now scanned and on my site. With the 16C book presumably being added soon, that means the only "Easy Course" book that would be missing would be the 19BII one.
Visit this user's website Find all posts by this user
Quote this message in a reply
09-28-2022, 01:26 AM (This post was last modified: 09-28-2022 02:25 AM by Sylvain Cote.)
Post: #12
RE: HHC 2022 videos posted
(09-27-2022 10:53 PM)Eric Rechlin Wrote:  With the 16C book presumably being added soon, that means the only "Easy Course" book that would be missing would be the 19BII one.
I have both:

An Easy Course in Using The HP-16C
→ 255 pages, letter format with metal ring binding, First printing, July 1987
→ easy to do a quality scan, if for some reasons Rick is unable to do the scan, let me know and I will scan it

An Easy Course in Using the HP 19BII
→ 445 pages, 7 1/8 x 5 1/8 x 7/8 format with perfect binding, First printing, July 1991
→ I do not want to cut the binding, so the best I can do is to manually scan it on a flatbed scanner, still interested ?
Find all posts by this user
Quote this message in a reply
09-28-2022, 07:43 AM
Post: #13
RE: HHC 2022 videos posted
(09-19-2022 07:54 AM)vaklaff Wrote:  I've never been to any HHC and likely will never be. I am so so grateful for the recordings! Thank you everybody who contributed in any way.

The weekend was very rainy here, I managed to devour most the the talks. Interesting and fun stuff, thanks again!

Well said! Thank you all for the contributions and the sharing!

Wikis are great, Contribute :)
Find all posts by this user
Quote this message in a reply
09-28-2022, 02:21 PM
Post: #14
RE: HHC 2022 videos posted
(09-28-2022 01:26 AM)Sylvain Cote Wrote:  I have both:

An Easy Course in Using The HP-16C
→ 255 pages, letter format with metal ring binding, First printing, July 1987
→ easy to do a quality scan, if for some reasons Rick is unable to do the scan, let me know and I will scan it

An Easy Course in Using the HP 19BII
→ 445 pages, 7 1/8 x 5 1/8 x 7/8 format with perfect binding, First printing, July 1991
→ I do not want to cut the binding, so the best I can do is to manually scan it on a flatbed scanner, still interested ?

Thanks Sylvain. Hopefully Rick can come through with the former to avoid you having to do anything there.

For the 19BII book, at the moment I will keep hoping to find an affordable copy to buy. Right now they are around $60, but I'd rather not pay more than $30 (and really I generally have a price ceiling of $20 for books to scan). Something unusual about the Easy Course books is they frequently have artwork going right to the spine of the page, making a flatbed scan less suitable than for most other books. When I did the 17BII book I had to very carefully cut it, removing no more than 0.5mm from the edge, and I still lost that much of the artwork. So I will keep looking for one to buy and cut, but failing that, I will keep your offer in mind -- thank you!
Visit this user's website Find all posts by this user
Quote this message in a reply
09-29-2022, 01:58 AM
Post: #15
RE: HHC 2022 videos posted
Inspired by seeing the HHC 2022 videos, as others in this thread.
Offering to scan spanish language manuals you don't appear to have:

Manual del usuario y guia de programacion HP-41C/41CV (00041-90318)
HP-41C Libro de aplicaciones (00041-90132)

I'm pretty sure I also have the manual for the card reader, let me know if interested and I'll see if I can get the scanner at work on settings you need

Juan
Find all posts by this user
Quote this message in a reply
09-29-2022, 04:13 PM
Post: #16
RE: HHC 2022 videos posted
(09-29-2022 01:58 AM)born2laser Wrote:  Inspired by seeing the HHC 2022 videos, as others in this thread.
Offering to scan spanish language manuals you don't appear to have:

Manual del usuario y guia de programacion HP-41C/41CV (00041-90318)
HP-41C Libro de aplicaciones (00041-90132)

I'm pretty sure I also have the manual for the card reader, let me know if interested and I'll see if I can get the scanner at work on settings you need

Juan

That would be great!

To my knowledge, 00041-90318 has never been scanned, so that would be hugely beneficial if we can get a scan of it. I believe it's full color, with a lot of shading, so a color 600 dpi scan with a quality scanner would be most beneficial. The English version of this manual is one of the largest scans on my site (258 MB and 286 full color pages) so this one is presumably going to be quite heavy as well, and a big undertaking to scan properly.

A color scan of the 00041-90132 book already exists in the collection of The Site Which Must Not Be Named, but it is low fidelity (300 dpi but with heavy JPEG compression and seemingly inaccurate colors), so a better scan of that would be very much appreciated too.

Thank you so much for your offer to help.
Visit this user's website Find all posts by this user
Quote this message in a reply
09-30-2022, 06:51 PM (This post was last modified: 10-10-2022 12:56 AM by born2laser.)
Post: #17
RE: HHC 2022 videos posted
(09-29-2022 04:13 PM)Eric Rechlin Wrote:  
(09-29-2022 01:58 AM)born2laser Wrote:  Inspired by seeing the HHC 2022 videos, as others in this thread.
Offering to scan spanish language manuals you don't appear to have:

Manual del usuario y guia de programacion HP-41C/41CV (00041-90318)
HP-41C Libro de aplicaciones (00041-90132)

I'm pretty sure I also have the manual for the card reader, let me know if interested and I'll see if I can get the scanner at work on settings you need

Juan

That would be great!

To my knowledge, 00041-90318 has never been scanned, so that would be hugely beneficial if we can get a scan of it. I believe it's full color, with a lot of shading, so a color 600 dpi scan with a quality scanner would be most beneficial. The English version of this manual is one of the largest scans on my site (258 MB and 286 full color pages) so this one is presumably going to be quite heavy as well, and a big undertaking to scan properly.

A color scan of the 00041-90132 book already exists in the collection of The Site Which Must Not Be Named, but it is low fidelity (300 dpi but with heavy JPEG compression and seemingly inaccurate colors), so a better scan of that would be very much appreciated too.

Thank you so much for your offer to help.

I am attaching an example page, please let me know if you can work with this, and point me to where I can dump the files, they will be huge I am sure
[attachment=11180]
Find all posts by this user
Quote this message in a reply
11-01-2022, 06:22 PM
Post: #18
RE: HHC 2022 videos posted
Post updated with links to videos of Charles McCord, Sylvain Côté, and Klaas Kuperus. Six more presentations!
Visit this user's website Find all posts by this user
Quote this message in a reply
11-01-2022, 09:08 PM
Post: #19
RE: HHC 2022 videos posted
(09-19-2022 02:18 AM)Eric Rechlin Wrote:  I'm surprised there has been no post-HHC discussion (aside from the programming contest), so I will start a thread! I think everyone had a great time, and we even had several first-time attendees.

As I have done at every conference since 2010, I made video recordings of the talks. This year I upgraded my primary camera to a 4K model, with the old primary (1080p) camera now being the secondary one, so video quality should be substantially improved over past years.

I have now uploaded all the videos of the talks that I recorded during the HHC 2022 conference in Nashville. The following 13 hours, 54 minutes, and 8 seconds of videos are now available for viewing:


Thank you very much. I am really enjoying these.
Find all posts by this user
Quote this message in a reply
Post Reply 




User(s) browsing this thread: 4 Guest(s)